Roberts Radio ecologic 6 manual System reset

Page 29

System reset

If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.

2

1.	Switch on your radio.
2.	Press and hold in the Menu/Info button.
3.	Press the Tuning Up/Down button until the display shows "Factory
	reset".
4.	Press in and release the Select button, the display will show "Press
	SELECT to conﬁ rm reset . . .".

3

3

5. Press the Select button to conﬁ rm. A full reset will be performed and

all presets and station lists will be erased. A quick scan of UK DAB

band III frequencies will be carried out. The clock will be set when the

radio recieves time information from the DAB radio station.

In case of malfunction due to electrostatic discharge, reset the product

(reconnection of power source may be required) to resume normal

operation.

If a problem persists our technical staff would be pleased to offer any

assistance on operating the radio. Our technical helpline number is

020 8758 0338.

4,5

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

28

Image 29

Contents Roberts Contents Controls front view Dimmer button Alarm buttonControls rear Using the clock radio for the ﬁrst time Selecting a station DAB Repeat this procedure for the remaining presets Presetting stations DAB and FMAbove procedure Number in which you wish to store the chosen stationRecalling a preset Finding new stations DAB Secondary services DAB Manual tuning DABCurrent station belongs Display modes DABPress the Tuning Up/Down button until the display shows DRC Dynamic Range Control DRC settings DABDefault is OrderFavourite stations Station order setup DABAlphanumeric Active stationPrune stations DAB Signal strength display DABOperating your radio Search tuning FM Manual tuning FM Display modes FM Stereo / Mono setting FM Auto preset stations FM Setting an alarm AlarmsAlarm minute will be highlighted Alarm source will be highlightedDay options as described below Then press the Select button to conﬁ rm the settingWeekends To cancel the alarm To view set alarm times To switch the alarm on or offTo set the snooze time SnoozeAppear on the display Will show on the displaySleep function Setting the clock manually To return to auto clock set mode Software version Dual mode dimmer backlightSystem reset To the Auxiliary input socket Auxiliary input socketHeadphone socket General Headphone socket 5mm dia Speciﬁcations Circuit features174.928 239.200MHz 87.50 108 MHz Aux in socket 5mm diaPage Guarantee Technical Helpline 020 8758 0338 Mon-Fri during ofﬁ ce hours Worton Road Isleworth Middlesex