Roberts Radio ecologic 6 manual Operating your radio Search tuning FM

Page 15

Operating your radio - Search tuning FM

1.	Place the wire antenna so that it is as straight as possible extending
	either above or below the radio.
2.	Press the On/Off button to switch on your clock radio.
3.	Press the Band button to select the FM band, then repeatedly press
	the Select button until "Auto tune" shows on the display.
4.	Press and release the Tuning Up button. Your radio will scan in
	an upwards direction (low frequency to high frequency) and stop
	automatically when it ﬁ nds a station of sufﬁ cient strength.
5.	After a few seconds the display will update. The display will show the
	frequency of the signal found. If the signal is strong enough and there
	is RDS data present then the radio will display the station name.

2

3

3

7

4,6

6.	To ﬁ nd other stations, press and release the Tuning Up button as
	before.
7.	To scan the FM band in a downwards direction (high frequency to low
	frequency) press and release the Tuning Down button.
8.	When the waveband end is reached your radio will recommence tuning
	from the opposite waveband end.
9.	Adjust the Volume buttons to the required setting.
10.	To switch off your radio press the On/Off button.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

9 9

10

14

Image 15

Contents Roberts Contents Controls front view Dimmer button Alarm buttonControls rear Using the clock radio for the ﬁrst time Selecting a station DAB Number in which you wish to store the chosen station Presetting stations DAB and FMRepeat this procedure for the remaining presets Above procedureRecalling a preset Finding new stations DAB Secondary services DAB Manual tuning DABCurrent station belongs Display modes DABOrder Dynamic Range Control DRC settings DABPress the Tuning Up/Down button until the display shows DRC Default isActive station Station order setup DABFavourite stations AlphanumericPrune stations DAB Signal strength display DABOperating your radio Search tuning FM Manual tuning FM Display modes FM Stereo / Mono setting FM Auto preset stations FM Alarm source will be highlighted AlarmsSetting an alarm Alarm minute will be highlightedThen press the Select button to conﬁ rm the setting WeekendsDay options as described below To cancel the alarm To view set alarm times To switch the alarm on or offWill show on the display SnoozeTo set the snooze time Appear on the displaySleep function Setting the clock manually To return to auto clock set mode Software version Dual mode dimmer backlightSystem reset To the Auxiliary input socket Auxiliary input socketHeadphone socket General 87.50 108 MHz Aux in socket 5mm dia Speciﬁcations Circuit featuresHeadphone socket 5mm dia 174.928 239.200MHzPage Guarantee Technical Helpline 020 8758 0338 Mon-Fri during ofﬁ ce hours Worton Road Isleworth Middlesex