Sharp MD X5 Preset tuning, To recall a preset station, To select preset numbers 11 to

(Continued)

3

1

2

3

Location number for storing a station in memory

HPreset tuning

You can store up to 40 stations in memory (40 stations consisting of any combination of FM and AM stations you like) and recall them together with their FM reception mode (stereo or mono), at the push of a button.

1 Perform steps 1 - 5 in the "Tuning" section.

2 Press the ENTER button.

3 Within 10 seconds, press the tuner preset number buttons.

4 Repeat steps 1 - 3 to set other preset stations, or to change a preset station.

IWhen a new station is stored in a preset number location, the previous contents of that location will be erased.

To select preset numbers 11 to 40.

Press the Y10 button first, then press the preset number.

For example to select 35:

1Press the Y10 button.

2Within 5 seconds, press the "3" button.

3Within 5 seconds, press the "5" button.

Note:

IAfter a prolonged power failure, the contents of the memory will be lost. When power is restored, enter your selections in memory again.(For power failures of just a few hours or less, the contents of the memory will not be lost.)

HTo recall a preset station

1 Press the TUNER (BAND) button.

2 Press the tuner preset number button to recall the preset channel.

IThe frequency will appear on the display.

Note:

IYou can create names for radio stations that have been stored in memory. (Page 27)

12

*01-21 12 98.6.23, 10:09 AM