
(Continued)
1,6 | 4 |
4 | 3 |
2,5 | 4 |
1
2
3,4,5
6
2
1
HTo create a track name
1 During playback, press the NAME/TOC EDIT button.
I“TRACK NAME” will appear.
2 Within 10 seconds, press the ENTER button.
IThe unit will enter the character input mode.
IThe track you are listening to will be played repeatedly.
3 Press the DISPLAY button to select the type of characters. (Page 25)
Alphabetics | © | Alphabetics | © Numbers or symbols | |||
(capital letters) | ||||||
© |
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
|
|
|
4 Select the character you want using the 1/0/▲/▼ buttons.
IWhen the ▲ or ▼ button is pressed, the following 5 letters will appear.
IEach time the 1or 0 button is pressed, the cursor will move to the next letter.
5 Press the ENTER button to enter the character.
IRepeat steps 3 to 5 above to enter characters in the name. When the next character’s type is the same as the previous character, step 3 can be skipped.
6 After entering all of the characters in the name, press the NAME/TOC EDIT button.
IThe track name will be recorded.
IThe unit will return to normal playback.
Notes:
IThe track name function can be used while in the stop mode (when selecting a track), in the pause mode, or in the recording mode.(Select “TRACK NAME” from the edit menu.)
IIf you create a track name while recording the track, make sure you finish entering the name before you finish recording the track.
If the end of the recording is reached before you have entered the complete name, only the characters entered before the recording ended will be recorded.
HTo erase track names
After performing steps 1 to 2 mentioned above, do the following:
1 Press the TIMER/DELETE button for at least 2 seconds.
IThe "NAME CLEAR?" display will appear.
2 Press the ENTER button.
IThe track name will be erased.
HTo erase a character
1 To correct a disc name, perform steps 1 - 3 on page 25.
To correct track names, perform steps 1 - 2 on page 26.
2 Press the CURSOR << or >> button to make the character you wish to erase begin flashing.
3 Press the TIMER/DELETE button.
IThe specified character will be erased.
4 Press the NAME/TOC EDIT button.
HTo add a character
1 To correct a disc name, perform steps 1 - 3 on page 25.
To correct track names, perform steps 1 - 2 on page 26.
2 Press the CURSOR << or >> button to make the character at the position where you wish to add a character begin flashing.
3 Select the character you want to add, using the 1/0/▲/▼ buttons. 4 Press the ENTER button.
IA letter will be added, and the original letters will move to the right by one.
5 Press the NAME/TOC EDIT button.
26
26 | 98.6.23, 10:10 AM |