Sharp MD X5 Recording from the built-in radio onto a MiniDisc, To interrupt recording

(Continued)

2

HRecording from the built-in radio onto a MiniDisc

1 Tune in the radio station to be recorded.

3

3

3

5

H

H

5

4

2 Load a recordable MiniDisc.

3 Press the I REC button.

IThe unit will enter the recording stand-by mode.

IAutomatic tuning is impossible while in the recording stand-by mode.

4 Check the recordable time by pressing the DISPLAY button on the remote control.

5 Press the MD 06 button.

IDuring recording, you cannot change the station.

Note:

IWhen recording from the AM band, put the unit in the recording stand- by mode. Then, before recording, separate the AM loop antenna from the main unit, and adjust the radio reception so that the AM station is tuned in clearly.

To interrupt recording:

Press the MD 06 button during recording.

Press the MD 06 button again to resume recording.

The track number increases.

To record the track number during recording:

Press the I REC button.

To stop recording:

Press the MD H button.

After recording the track number, recording stops.

Notes:

I The contents of a single recording are recorded under a single track

number as a series of tracks.

I If you use the monaural extended recording mode, you can make

Number of tracks already recorded

4

Recordable time

recordings that are about twice as long as stereo recordings. This is

convenient for recording monaural broadcasts or talk programs. (Page

17)

19

*01-21 19 98.6.23, 10:09 AM