Sangean Electronics K-200 manual Manual tuning AM/FM

Page 13

Manual tuning – AM/FM

1. Press the Standby button to switch on your radio.

2. Press and release the Band button to select AM or FM radio mode.

GB

3. Rotate the Tuning control to tune to a station. The FM frequency will change in steps of 200kHz (American version) /

100kHz (European version) and AM frequency will change in steps of 10kHz (American version) / 9kHz (European version).

2

4.When the end of the waveband is reached your radio will recommence tuning from the opposite end of the waveband.

5.Use the Volume control to adjust the sound level as required.

3

5

12

Image 13

Contents Page Table of Contents Important Safety Instructions Page Introduction Controls and connections Built-in Microphone Tuning control knob LCD display Battery compartment Aux in socket Headphone socket Buzzer level control Display icons AC operation Using the radio for the first timeOperating your radio Search tuning AM/FM Manual tuning AM/FM Setting up the tuning step increment Display modes FM Recalling a preset in AM/FM modes Presetting stations in AM/FM modesSetting the time format Clock and AlarmsSetting the clock time manually Setting the clock time using RDS CT Setting the alarm clock Page Disabling/cancelling alarms When the alarm soundsSnooze Auto Off Timer Egg Timer function Brightness control DisplayMessage function Headphone socket Software versionAuxiliary input socket Power Requirements Specifications Circuit Features