Sangean Electronics K-200 manual Display, Brightness control

Page 25

Display

Brightness control

The brightness of the display when the unit is in standby mode may be adjusted. If you use the unit in the bedroom, you may prefer a lower standby brightness level than the standard setting.

1.Press and release the Backlight button to adjust the current brightness level of the LCD display. The backlight level will change with 8 different illumination levels so that you can see the effect of the change.

2.Stop when the desired backlight level is selected.

Moon LED

When using the radio, you can turn on the scenario LED at the bottom of the receiver for your better listening experience.

1.Press and hold the Light button to adjust the current scenario LED setting.

2.When the LED is on, press and hold the Light button to turn off the LED.

3.To switch and LED back on, press and hold the Light button again to turn on the LED.

GB

24

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Table of Contents Important Safety Instructions Page Introduction Controls and connections Built-in Microphone Tuning control knob LCD display Battery compartment Aux in socket Headphone socket Buzzer level control Display icons AC operation Using the radio for the first timeOperating your radio Search tuning AM/FM Manual tuning AM/FM Setting up the tuning step increment Display modes FM Recalling a preset in AM/FM modes Presetting stations in AM/FM modesSetting the time format Clock and AlarmsSetting the clock time manually Setting the clock time using RDS CT Setting the alarm clock Page Disabling/cancelling alarms When the alarm soundsSnooze Auto Off Timer Egg Timer function Brightness control DisplayMessage function Headphone socket Software versionAuxiliary input socket Power Requirements Specifications Circuit Features
Top Page Image Contents