Sangean Electronics K-200 Setting the clock time manually

Page 18

Setting the clock time manually

1. Press the Standby button to switch on your radio.

2. Press and hold the CT button until the radio beeps once to enter the clock time setting, and the hour setting will begin to flash.

The display will show “CLOCKSET”.

3. Rotate the Tuning control to select the desired hour, and press and release the Tuning control to confirm the setting. Then rotate the Tuning control to select the desired minute, and press and release the Tuning control to confirm the setting.

4.Rotate the Tuning control to select the desired month, and press and release the Tuning control to confirm the setting. Then rotate the Tuning control to select the desired date, and press and release the

Tuning control to confirm the setting.

3,5

 

5. Rotate the Tuning control to select the desired year, then press and release the Tuning control to confirm the setting.

17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Page Table of Contents Important Safety Instructions Page Introduction Controls and connections Built-in Microphone Tuning control knob LCD display Battery compartment Aux in socket Headphone socket Buzzer level control Display icons Using the radio for the first time AC operationOperating your radio Search tuning AM/FM Manual tuning AM/FM Setting up the tuning step increment Display modes FM Presetting stations in AM/FM modes Recalling a preset in AM/FM modesClock and Alarms Setting the time formatSetting the clock time manually Setting the clock time using RDS CT Setting the alarm clock Page When the alarm sounds Disabling/cancelling alarmsSnooze Auto Off Timer Egg Timer function Display Brightness controlMessage function Software version Headphone socketAuxiliary input socket Specifications Circuit Features Power Requirements
Top Page Image Contents