Sangean Electronics K-200 manual Egg Timer function

Page 24

Egg Timer function

1.Press and release the Egg timer button to enter the egg timer setting. The egg timer setting will start flashing on the display.

2. Rotate the Tuning control to adjust the minute setting during 1 and 120 minutes with 1 minute interval. Press and release the Tuning control to finish the setting and the timer will start to countdown.

3.The egg timer icon will flash on the display indicating an active egg timer, meanwhile the display will show the remaining minutes.

To cancel the function when countdown is progressing, press and

2,3

hold the Egg Timer button.

 

4. Rotate the Tuning control while the display shows the remaining time of countdown to adjust the required timer setting, then press and release the Tuning control to confirm the adjustment.

Note:

the digital receiver will sound for 3 minutes when an active timer finishes its countdown.

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Page Table of Contents Important Safety Instructions Page Introduction Controls and connections Built-in Microphone Tuning control knob LCD display Battery compartment Aux in socket Headphone socket Buzzer level control Display icons Using the radio for the first time AC operationOperating your radio Search tuning AM/FM Manual tuning AM/FM Setting up the tuning step increment Display modes FM Presetting stations in AM/FM modes Recalling a preset in AM/FM modesClock and Alarms Setting the time formatSetting the clock time manually Setting the clock time using RDS CT Setting the alarm clock Page When the alarm sounds Disabling/cancelling alarmsSnooze Auto Off Timer Egg Timer function Display Brightness controlMessage function Software version Headphone socketAuxiliary input socket Specifications Circuit Features Power Requirements
Top Page Image Contents