Panasonic EP1061 manual Troubleshooting

Page 14

TROUBLESHOOTING

Before requesting service for this unit, check the table below for the possible cause of the problem. Some simple checks or minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, call us at 1-800-338-0552 to locate the servicer near to you.

Problem

 

 

Cause and Remedy

 

 

 

 

Motor Noises

 

 

• The motor gets louder when it comes under load.

 

 

• There is excessive noise during Tapping.

 

 

(The noise is louder at the top of the unit.)

H

These sounds are perfectly normal and will not have

• The motor sounds louder when adjusting massage

intensity and width.

 

any effect on the operation of the unit.

• There is a rubbing sound produced by the massage

 

 

heads rubbing on the seat fabric.

 

 

• There is a rubbing sound produced by fabric rubbing

 

 

on fabric.

 

 

 

 

 

 

The massage heads stop during operation.

H

When the massage heads are raised or lowered, if

they come into contact with a wall or other obstruction,

 

 

 

in the interests of safety the massage heads may

Problem

 

Cause and Remedy

 

 

 

It is not possible to recline the unit.

H

If the unit encounters an obstacle or if excessive

The legrest cannot be raised or lowered.

force is exerted on it during operation, in the

 

 

interests of safety the unit will come to a stop.

 

 

If all markings and buttons on the controller start to

 

 

flash, which is extremely unusual, turn off the power

 

 

switch, wait for approximately 10 seconds and then

 

 

turn the power switch on again.

 

 

 

Even though I press the reclining button

H

When retracting the backrest, in the interests of

nothing appears to happen.

safety, the massage heads move to the retracted

 

 

position before the backrest starts to retract.

 

 

Please hold down the button until the backrest is fully

 

 

reclined.

 

 

 

The controller becomes warm.

H

If the unit is used continuously for an extended

 

period of time it will naturally become warm.

 

 

If the controller becomes too hot, immediately stop

 

 

using the unit and return it for inspection or repair to

 

 

the place that you bought it.

 

stop moving. In such a situation, move the chair or

 

remove the obstruction and start the massage again.

 

If all markings and buttons on the controller start to

 

flash, which is extremely unusual, turn off the power

 

switch, wait for approximately 10 seconds and then

 

turn the power switch on again.

H

If excessive force is applied to the massage heads

during operation, in the interests of safety the

 

massage heads may stop moving. If this occurs,

The unit will not operate at all.

•Upper body (neck to lower back) massage.

•Leg massage.

H

H

• The power cord has been disconnected.

(See Page 11)

•The power switch on the unit has not been turned on. (See Page 11)

•After pressing button, the program button or the manual operation selection button has not been

pushed.

(See Pages 14–17)

The power cord has been disconnected.

 

 

raise your body slightly before restarting it.

 

 

If all markings and buttons on the controller start to

 

 

flash, which is extremely unusual, turn off the power

 

 

switch, wait for approximately 10 seconds and then

 

 

turn the power switch on again.

 

 

 

Nothing can be felt when using Tap A, Tap B

H

If the massage heads are not touching your body

or Vibration.

 

then you will, of course, feel nothing. Therefore,

 

 

please make sure that your body comes into close

 

 

contact with the massage heads.

 

 

 

The massage heads do not come up to the

H

The position of the shoulders is incorrect.

shoulder or neck.

 

(See Page 14)

The length of the programs selected in

H

• When using the massage lounger in programmed

programmed operation varies.

operation, when the program is finished movement

 

 

automatically stops. (Although programmed

 

 

operation lasts for approximately 15 minutes

 

 

(12–17 minutes), this will vary according to the

 

 

shoulder position and program selected, whether or

 

 

not tapping is on or off, and the weight of the

 

 

person using the unit.)

 

 

 

The unit has been damaged.

H

Unplug AC cord from outlet immediately and have

massage lounger serviced.

 

 

 

The power cord or power plug is abnormally

H

Unplug AC cord from outlet immediately and have

hot.

 

massage lounger serviced.

26

27

Page 13 Page 15
Image 14
Page 13 Page 15
Contents No.2EN,SP（アメリカ） Important Safety Instructions Index / íNDICECaring for the Massager Safety PrecautionsOperating Precautions Part Names and Functions HOW to Move the ChairGrounding Instructions SeatController EP1061 Setting UP the Massage LoungerWhere to USE the Unit Controller EP1060gentlelegmassagestrongBefore Using the Unit After Checking the Surrounding AREA, Turn on the PowerBefore Sitting Down Adjusting the SeatAdjusting the Pillow Reclining the SeatProgrammed Operation Manual Operation Manual Operation for the Upper BodyReturn the Seat to the Original Position After Completing the MassageLEG Massage in Manual Operation EP1061 Stopping Manual OperationUnplug the Power Cord Disconnect the PowerTurn Off the Power StrongSTRONG/LOWER Back Combination STRONG/NECK & Shoulder CombinationGENTLE/NECK & Shoulder Combination GENTLE/LOWER Back CombinationPILLOW, Back CUSHION, Seat and Armrest Covers Cleaning and MaintenanceDetails Regarding Manual Operation Pipes and Plastic AreasTroubleshooting Specifications EP1061 Specifications EP1060Instrucciones DE Seguridad Conserve Estas InstruccionesCuidado DEL SILLóN DE Masaje Precauciones DE SeguridadPrecauciones Para EL Funcionamiento Partes DE LA Unidad Y SUS Funciones Conexió N a Toma DE TierraCÓ MO Mover EL Asiento Emplazamiento DE LA Unidad Montaje DEL Silló N DE MasajeMando DE Control EP1061 PrecaucionesAntes DEL USO DE LA Unidad Tras Comprobar EL Á REA CIRCUNDANTE, Encienda LA UnidadAdvertencia Ajuste DEL AsientoAntes DE Sentarse Precauciones Reclinar EL Asiento Colocació N DEL CojínModo Programado Modo Manual Modo Manual EN LA Parte Superior DEL CuerpoDevolver EL Asiento a LA Posició N Inicial Despué S DE Completar EL MasajeMasaje DE Piernas CON EL Modo Manual EP1061 Parada DEL Modo ManualFuerte Detalles DEL Modo ProgramadoDesconectar LA Unidad SuaveFUERTE/ZONA Lumbar FUERTE/CUELLO Y HombrosSUAVE/CUELLO Y Hombros SUAVE/ZONA LumbarTubos Y Á Reas DE PLÁ Stico Detalles DEL Modo ManualLimpieza Y Mantenimiento Tejido DEL AsientoLocalizació N DE Averías Datos TÉ Cnicos EP1061 Datos TÉ Cnicos EP1060

EP1061 specifications

The Panasonic EP1061 is a state-of-the-art massage chair designed to bring the spa experience into the comfort of your home. Known for its advanced features and user-friendly design, the EP1061 aims to provide users with a comprehensive and relaxing massage experience that promotes overall well-being.

One of the main features of the Panasonic EP1061 is its personalized massage options. Users can choose from a variety of massage techniques, including kneading, tapping, and rolling, which can be combined to match individual preferences. The chair also offers different intensity levels, allowing users to customize the massage to suit their specific needs, whether they require a gentle relaxation session or an intense therapeutic experience.

The EP1061 utilizes advanced technologies, including a unique body scan system. This innovative feature detects the contours and shape of the user’s body, ensuring that the massage rollers target the exact pressure points for maximum effect. This personalized approach ensures that every user receives a tailored massage experience, making it suitable for individuals of various sizes and shapes.

The chair is equipped with multiple pre-programmed massage settings designed to alleviate common ailments such as back pain, tension, and fatigue. Additionally, users can also save their favorite settings, allowing for quick and easy access to their preferred massage routine.

Comfort is paramount in the design of the EP1061, which features high-quality upholstery and adjustable settings. The chair is designed to accommodate a range of body types, providing proper support and ensuring that users can relax comfortably during their massage sessions.

Another standout feature of the Panasonic EP1061 is its built-in heat therapy function. This soothing feature uses gentle warmth to enhance relaxation and relieve muscle stiffness, promoting better blood circulation and overall relaxation. Heat therapy is particularly beneficial after a long day, providing added comfort and helping to ease tension.

In summary, the Panasonic EP1061 is a remarkable massage chair that combines advanced technology with user-centric design. Its personalized massage programs, body scan capabilities, and heat therapy function make it a valuable addition to any home, promoting relaxation, pain relief, and well-being. Ideal for those looking to experience the benefits of professional massage in their daily lives, the EP1061 stands out as one of Panasonic's leading massage solutions.
Top Page Image Contents