Panasonic EP1061 manual Programmed Operation

PROGRAMMED OPERATION

• Please check that there are no children or pets in the vicinity of the unit before use.

• When the Shoulder Position Indicator is flashing, adjust the position of the massage heads (upper roller) so that they lightly touch the shoulder.

•The shoulder position can be adjusted up and down 4in. (10cm).

•When it is not possible to correctly adjust the shoulder position, slide

your body down and try adjusting it again.

Too high

	1. Press	button
1	• The ON/OFF lamp will come on.
	• You can now select either strong or gentle or one of the manual settings
neck roller position reclining	that can be accessed by opening the cover of the controller.

Correct position

• Lightly touching the shoulder.

Too low

4.Selecting an Area for Concentrated Massage

• Please see Page 21–23 for details regarding the programs.

3

programmed		/	manual
operation			operation
programmed operation
storong			gentle
2	whole back
neck, shoulder			lower back
4
vibration on/off			tap on/off

2.Select the Program You Want

•See Page 21 for details regarding the content of each of these programs.

Vigorously Massage the Whole Back

• Strong uses mainly a kneading massage and Shiatsu massage to

relax stiff muscles.	programmed operation
• This type of massage is ideal for
	strong	gentle
people with stiff muscles
		whole back
throughout their entire back.
• Massage starts out predominantly in
the upper back.		Press

Gently Massage the Whole Back

Massaging the Neck and Shoulders			Massaging the Lower Back
• Press this button to focus the program on the neck			• Press this button to focus the program on the lower
and shoulders.			back.
(The upper and lower	neck, shoulder	lower back	(The neck and	neck, shoulder	lower back
back will also be			shoulders will also be
massaged slightly.)			massaged slightly.)
• Press the button			• Press the button
again to toggle off.		Press	again to toggle off.		Press

5. Removing Vibration and Tapping from Programs

5

• This type of massage is ideal for

programmed operation

stronggentle

people who are feeling tired or weary.

The Selected Program will Start

• It is gentler than shiatsu massage - more like a sewedish palm massage.

whole back

Press

•It is possible to change the program selected and the desired movement mid-way through a massage.

•In Programmed Operation, the leg massage begins at the same time.

It is possible to stop or change the intensity of the leg massage during the program. (Please see Page 18.)

•When retracting the backrest, as the massage heads must be retracted in the interests of safety there may be a slight delay before the backrest actually starts to retract. Please continue to hold down the Reclining Button until the backrest is fully retracted.

The Seat Automatically Reclines to the Massage Position

•Initial position if auto recline is for both back and open ottoman operation. (for soles and feet.)

•To recline further, please use the recline button, but it is not recommended to keep the ottoman open.

Removing Vibration from Programmed Operation Removing Tapping from Programmed Operation

•Press this button to remove vibration in programmed operation. (The vibration will change to a kneading massage.)

•Press this button to remove tapping in programmed operation. (The tapping will change to a kneading massage.)

* Press the button	vibration on/off	tap on/off
again to restore
vibration to the
program.		Press

* Press the button	vibration on/off	tap on/off
again to restore
tapping to the
program.		Press

•For Tapping B, and Vibration, unless the massage heads are actually touching the body then you may not feel anything.

6. Adjusting Massage Intensity	Increasing massage intensity	Decreasing massage intensity
• Massage intensity can be adjusted up to 3 levels.	intensity	intensity
• When the massage heads reach their limit you will hear a “peep,
peep, peep” sound.
		Press

Normal Position (EP1061)

Normal Position (EP1060)

Massage Position

Reclining

In this comfortable position it is possible to massage from the neck to the soles of the feet.

Massage Position

Reclining

In this comfortable position it is possible to massage from the neck to the soles of the feet.

Approx. 3° Reclined

Approx. 14°

Raised

Approx. 14° Reclined

Approx. 60°

Raised

Press

7. Auto Stop in Programmed Operation

When the selected program has been completed, the unit will automatically come to a stop.

(Although programmed operation lasts for approximately 15 minutes (12–17 minutes), this will vary according to the shoulder position and program selected, whether or not tapping is on or off, and the weight of the person using the unit.)

• The massage heads will move to the retracted position and stop.
• The ON/OFF lamp will flash until the heads have stopped moving.
• If you want to start another massage, please press	button.
• Please rest at least 10 minutes between massages.

3.Adjusting Shoulder Position

•When programmed operation begins, the seat automatically reclines to the massage position where the massage heads carry out a Shiatsu massage in the area around the shoulders. During the time that the Shoulder Position Indicator is flashing (approx. 20 seconds), use the Shoulder Position Adjustment Button to adjust the position of the massage heads, limiting how high they will go.

Approximate positions for adjusting the position of the rollers are shown below.

8. Stopping Programmed Operation

Press button to stop programmed operation.

• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.

9.Stopping the Massage Immediately

• It is possible to change the position of the rollers

during the massage.

• As the position of the shoulders will change when

the reclining angle is changed during a massage,

Up	Down	Approximate Body Height
neck roller position	neck roller position	neck roller position
		6.1ft

5.2ft

Press

Press button to stop programmed operation immediately.

•All movement will stop immediately.

•The massage heads will not return to the retracted position, which may make sitting in the seat somewhat uncomfortable.

•Please press button twice in order to return the massage heads to the retracted position.

please readjust the shoulder position every time

you change the reclining angle.

Press

4.6ft

14

• 5-stage (up-down approx. 4in.) adjustment.

15