Heat Controller HCG**V1E, HMG**X1E, HMG**F1E Installer Name, Installation Address

INSTALLATION / PERFORMANCE CHECK LIST

INSTALLER NAME:

CITY:	STATE:
INSTALLATION ADDRESS:
CITY:	STATE:
UNIT MODEL #
UNIT SERIAL #
Minimum clearances per page 4?	YES	NO
Is the unit properly installed and	YES	NO
leveled?
Does condensate drain properly	YES	NO
in both drain tubes?
Has the owner’s information been	YES	NO
reviewed with the home-owner?
Has the literature package been	YES	NO
left near the appliance?

ELECTRICAL SYSTEM:

Electrical connections tight?	YES	NO
Line voltage polarity correct?	YES	NO

Supply Voltage: ___________________________________(V)

Has the thermostat been calibrated?	YES	NO
Is the thermostat level?	YES	NO
Is the heat anticipator setting correct?	YES	NO

ATTENTION INSTALLERS:

It is your responsibility to know this product better than your customer. This includes being able to install the product according to strict safety guidelines and instructing the customer on how to operate and maintain the equipment for the life of the product. Safety should always be the deciding factor when installing this product and using common sense plays an important role as well. Pay attention to all safety warnings and any other special notes highlighted in the manual. Improper installation of the air handler or failure to follow safety warnings could result in serious injury, death, or property damage.

These instructions are primarily intended to assist qualified individuals experienced in the proper installation of this appliance. Some local codes require licensed installation/service personnel for this type of equipment. Please read all instructions carefully before starting the installation. Return these instructions to the customer’s package for future reference.

Specifications & illustrations subject to change without notice or incurring obligations.
Jackson, MI Printed in U.S.A. (11/12)	709557A (Replaces 7095570)