Heat Controller DMH18DB-1 Service Manual, To remove the Motor Cover, To remove the Cross-FlowFan

	Disassembly
•	Unhook the tab on the right inside of the chassis
	at the same time, slightly pull the evaporator
	toward you until the tab is clear of the slot.

5.To remove the Motor Cover

•Remove 2 securing screw.

•Pull the motor cover out from the chassis carefully.

6.To remove the Cross-Flow Fan

•Loosen the screw securing the cross-flow fan to the fan motor (do not remove).

•Lift up the right side of the cross-flow fan and the fan motor, separate the fan motor from the cross-flow fan.

•Remove the left end of the cross-flow fan from the self-aligning bearing.

Motor cover

Bearing

Cross-flow fan

Service Manual 45