Heat Controller VMC30SB-1 manual Maintenance and Service, Indoor Unit

Page 15

Maintenance and Service

Maintenance and Service

Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and unplug the power cord.

IndoorUnit

Clean the unit with a soft dry cloth. Do not use bleach or abrasives.

Never use any of these

 

• Water hotter than 40°C(104°F). It may cause deformation and discoloration.

Powder

• Volatile substances. They may damage the surface of the air conditioner.

 

Air Filters

The air filters behind the front panel / grill should be checked and cleaned once in every 2 weeks or more often if necessary. To remove the filters see the self explanatory diagrams for each model type. Clean the filters with a vacuum cleaner or warm soapy water. If dirt is not easily removed, wash with a solution of detergent in luke warm water. Dry well in shade after washing and reinstall the filters back in place.

Deodorizer Filters

Remove the deodorizer filters behind the air filter and expose them in direct sunlight for 2 hours.

And then insert these filters into original position.

Removal of Filters

Open the front panel as shown.

Then pull the filter tab slightly forward to remove the air filter.

After removing the air filter remove the deodorizer filter by slightly pulling forward.

G

a

s

o

ilne

Deodorizer filter

Owner's Manual 15

Image 15
Contents Heat CONTROLLER, INC Table of Contents It may cause product to fall Before using it againProduct by yourself AgeRegularly Do not place Anything on the power cableKeep level even when installing the product Injury Electric shock or fireCause personal injury Installing the productUninstalling it Product is operatingNever use the appliance with a broken adapter Electrical SafetySymbols used in this Manual Temporary Use of an AdapterOutdoor Unit Product IntroductionIndoor Units Operation Indication LampsOperating Instructions How to insert the BatteriesWireless Remote Controller Maintenance Signal receiver is inside the unitNd F Button Wireless Remote ControllerENERGY-SAVING Cooling Mode Button Used to save Energy Cooling ModelUnit will respond with a beep Operation ModeOpen the door of the remote controller and press Turn the unit onJet Cool Operation Auto CleanTemperature Healthy Dehumidification OperationForced operation Energy-Saving Cooling ModeCooling mode or healthy dehumidification mode Sleep ModeSetting the Current Time Timer SettingAgain Vertical / Horizontal Airflow Direction Control OptionalIndoor Unit Maintenance and ServiceOperation Tips Self-Diagnosis FunctionThis is not healthy and wastes electricity Troubleshooting Tips! Save time and money No. MFL39817407