Heat Controller VMC30SB-1 Installing the product, Product is operating, Cause personal injury

Page 5

Safety Precautions

Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.

There is risk of damage or loss of property.

Do not touch the metal parts of the product when removing the air filter.

There is risk of personal injury.

Do not block the inlet or outlet of air flow.

It may cause product failure.

Do not step on or put anyting on the product. (outdoor units)

There is risk of personal injury and failure of product.

Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing water etc .

There is risk of fire, electric shock, or damage to the plastic parts of the product.

Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary.

A dirty filter reduces the efficiency.

Do not insert hands or other objects

Be cautious when unpacking and

through the air inlet or outlet while the

installing the product.

product is operating.

 

• There are sharp and moving parts that could

• Sharp edges could cause injury.

cause personal injury.

 

Do not tilt the unit when removing or

Do not mix air or gas other than the

uninstalling it.

specified refrigerant used in the system .

• The condensed water inside can spill .

• If air enters the refrigerant system, an

 

excessively high pressure results, causing

 

equipment damage or injury.

If the refrigerant gas leaks during the repair, ventilate the area and do not touch the refrigerant gas.

The refrigerant gas can cause frostbite (cold burn)

If the refrigerant gas leaks during the installation, ventilate the area immediately.

Otherwise it can be harmfull for your health.

Dismantling the unit, treatment of the refrigerant oil and eventual parts should be done in accordance with local and national standards.

If the liquid from the batteries gets onto your skin or clothes, rinse well with water and contact your doctor or local poison control center. Do not use the remote if the batteries have leaked.

The chemicals in batteries could cause burns or other health hazards.

Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or different types of batteries.

There is risk of fire or product failure.

If you consume the liquid from the batteries, rinse your mouth with water and contact your doctor or local poison control center. Do not use the remote if the batteries have leaked.

The chemicals in batteries could cause burns or other health hazards.

Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire.

They may burn or explode.

Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open.

Moisture may condense and wet or damage furniture.

Humans, pets, and plants should avoid direct exposure to the cool or hot air discharge/draft.

• This could harm to your health.

Do not drink the water drained from the product.

It is not sanitary and could cause serious health issues.

Use a firm stool or ladder when cleaning, maintaining or repairing the product at elevated heights.

• Be careful and avoid personal injury.

Owner's Manual 5

Image 5
Contents Heat CONTROLLER, INC Table of Contents Product by yourself Before using it againAge It may cause product to fallKeep level even when installing the product Do not place Anything on the power cableInjury Electric shock or fire RegularlyUninstalling it Installing the productProduct is operating Cause personal injurySymbols used in this Manual Electrical SafetyTemporary Use of an Adapter Never use the appliance with a broken adapterIndoor Units Product IntroductionOperation Indication Lamps Outdoor UnitWireless Remote Controller Maintenance How to insert the BatteriesSignal receiver is inside the unit Operating InstructionsENERGY-SAVING Cooling Mode Button Used to save Energy Wireless Remote ControllerCooling Model Nd F ButtonOpen the door of the remote controller and press Operation ModeTurn the unit on Unit will respond with a beepTemperature Auto CleanHealthy Dehumidification Operation Jet Cool OperationForced operation Energy-Saving Cooling ModeSetting the Current Time Sleep ModeTimer Setting Cooling mode or healthy dehumidification modeAgain Vertical / Horizontal Airflow Direction Control OptionalIndoor Unit Maintenance and ServiceThis is not healthy and wastes electricity Operation TipsSelf-Diagnosis Function Troubleshooting Tips! Save time and money No. MFL39817407