Heat Controller VMC30SB-1 manual Troubleshooting Tips! Save time and money

Page 17

Maintenance and Service

TroubleshootingTips!Savetimeandmoney!

The air conditioner may be operating abnormally when:

Problem

 

Possible Causes

 

What To Do

 

 

 

 

 

 

 

 

 

 

Air conditioner does not start

The air conditioner is

• Make sure the air conditioner plug is

unplugged.

pushed completely into the outlet.

The fuse is blown/circuit

• Check the house fuse/circuit breaker box

breaker is tripped.

and replace the fuse or reset the breaker.

Power failure.

• If power failure occurs, turn the mode

 

control to OFF.

 

When power is restored, wait 3 minutes to

 

restart the air conditioner to prevent

 

tripping of the compressor overload.

High voltage.

• If the voltage is unusually very high or low

 

the Circuit Breaker will trip.

Air conditioner does not cool as it should

Airflow is restricted.

The air filter is dirty.

The room may have been hot.

Cold air is escaping.

Check the temperature settings.

There might be a heating source in the room.

Make sure there are no curtains, blinds, or furniture blocking the front of the air conditioner.

Clean the filter at least every 2 weeks. See the Maintenance and Service section.

When the air conditioner is first turned on, you need to allow time for the room to cool down.

Check for open furnace floor registers and cold air returns.

Make sure they are correct.

Check and remove such source or turn it off while using the air conditioner.

Calltheserviceimmediately inthefollowingsituations

1.Anything abnormal such as burning smell, loud noise etc. happens. Stop the unit and turn the breaker off. Never try to repair by yourself or restart the system in such cases.

2.Main power cord is too hot or damaged.

3.Error code is generated by self diagnosis.

4.Water leaks from indoor unit even if the humidity is low.

5.Any switch, breaker (safety, ground) or fuse fails to work properly

User must carry routine checkup & cleaning to avoid poor performance. Any other types of service must be carried out by service person only.

Owner's Manual 17

Image 17
Contents Heat CONTROLLER, INC Table of Contents Product by yourself Before using it againAge It may cause product to fallKeep level even when installing the product Do not place Anything on the power cableInjury Electric shock or fire RegularlyUninstalling it Installing the productProduct is operating Cause personal injurySymbols used in this Manual Electrical SafetyTemporary Use of an Adapter Never use the appliance with a broken adapterIndoor Units Product IntroductionOperation Indication Lamps Outdoor UnitWireless Remote Controller Maintenance How to insert the BatteriesSignal receiver is inside the unit Operating InstructionsENERGY-SAVING Cooling Mode Button Used to save Energy Wireless Remote ControllerCooling Model Nd F ButtonOpen the door of the remote controller and press Operation ModeTurn the unit on Unit will respond with a beepTemperature Auto CleanHealthy Dehumidification Operation Jet Cool OperationForced operation Energy-Saving Cooling ModeSetting the Current Time Sleep ModeTimer Setting Cooling mode or healthy dehumidification modeAgain Vertical / Horizontal Airflow Direction Control OptionalIndoor Unit Maintenance and ServiceThis is not healthy and wastes electricity Operation TipsSelf-Diagnosis Function Troubleshooting Tips! Save time and money No. MFL39817407