Heat Controller VMC30SB-1 Operating Instructions, How to insert the Batteries, Operating Method

Operating Instructions

Operating Instructions

HowtoinserttheBatteries

1. Remove the battery cover by pulling it according to the arrow direction.

2. Insert new batteries making sure that the (+) and (-) of battery are installed correctly.(Battery Size: AAA 1.5V)

3. Reattach the cover by sliding it back into position.

NOTE

1. Always use/replace both batteries of same type.

2. If the system is not to be used for a long time, remove the batteries to save their working life.

3. If the display screen of remote controller starts, fading replace both of the batteries.

WirelessRemoteControllerMaintenance

1. Choose a suitable place where its safe & easy to reach.

2. Fix the holder to wall etc with the supplied screws firmly.

3. Slide the remote controller inside the holder.

NOTE

1.Remote controller should never be exposed to direct sunlight.

2.Signal transmitter & receiver should always be clean for proper communication. Use a soft cloth to clean them.

3.In case some other appliances also get operated with remote control, change their position or consult your serviceman.

OperatingMethod

1.The signal receiver is inside the unit.

2.Aim the remote controller towards the unit to operate it. There should not be any blockage in between.

8Room Air Conditioner