Operating Instructions
Wireless
Remote
Controller
The controls will look like the following. | 1. START/STOP BUTTON |
| Used to turn off/on the unit. |
Signal transmitter
5 |
|
| 1 |
6 |
|
|
|
|
|
| 3 |
4 |
|
|
|
2 |
| CANCEL | 10 |
|
| ||
|
| 9 | |
7 | OFF | SET | |
ON | 12 |
11 | AUTO CLEAN | |
13 | ||
8 | ||
|
14
17
15
16
Operation Mode 
Cooling Operation
Healthy Dehumidification Operation
•Cooling Model(
)
2.OPERATION MODE SELECTION BUTTON Used to select the operation mode.
3.ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature.
4.INDOOR FAN SPEED SELECTOR BUTTON Used to select fan speed in four steps
low, medium, high and CHAOS.
5.JET COOL BUTTON
Used to start or stop the speed cooling. (It operates fan in super high speed.)
6.CHAOS SWING BUTTON
Used to stop or start louver movement and set the desired up/down airflow direction.
7.ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping operation.
8.TIME SETTING BUTTONS Used to adjust the time.
9.TIMER SET/CANCEL BUTTON
Used to set and to cancel the timer operation.
10.SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
11.ENERGY-SAVING COOLING MODE BUTTON Used to save Energy.
12.ROOM TEMPERATURE CHECKING BUTTON Used to check the room temperature.
13.AUTO CLEAN BUTTON Used to set auto clean mode.
14.˚C TO ˚F SWITCHING BUTTON
Used to switch temperature reading from Centigrade to Fahrenheit.
15.RESET BUTTON
Used prior to resetting time.
16.2nd F BUTTON
Used prior to using modes printed in blue at the bottom of buttons.
17.HORIZONTAL AIRFLOW DIRECTION CONTROL BUTTON (OPTIONAL)
Used to set the desired horizontal airflow direction.
NOTE
To use the functions printed in blue at the bottom of the buttons press 2nd F button first and then the required function button. Pressing the 2nd F button activates the blue printed function of the respective button. To cancel the function press the 2nd F button again else it will automatically cancel if remains idle after 10 seconds.
Owner's Manual 9