Connect Indoor and Outdoor Electric Wire | Haier KC18AGH, SAP-K18AM

Installation Service

9. INSTALL INDOOR UNIT

9.4Connect Indoor and Outdoor Electric Wire

1.The power wire and power connection wire are supplied in factory in a fixed length. (Fig.15a, 15b)

NOTE Do consult your local dealer if additional wire length is required.

2.Open the surface panel and remove the wiring cover. (Fig.15a, 15b)

3.Route the power connection cordand signal control wire (for cooling and heating unit only) from the back of the indoor unit and pull it toward the front through the wiring hole for connection.

4.Connect the interconnection cord to the terminal block, and then fix the cord with cord anchorge.

5.Reassemble the clampand wiring cover.

6.Recover thesurface panel.

WARNING

Since one end of power connector wire has been connected in the unit, when testing unit with electrified, the other end of the power connect wire may carry electricity. Please note to prepare well insulation to prevent short circuit or electricity shock.

9.4.1 Wiring Instructions

NOTE General precautions on wirings

1.Before wiring, confirm the rated voltage of the unit as shown in nameplate, then carry out the wiring closely follow the wiring diagram.

2.Provide a power outlet to be used exclusively for each unit, with a power supply disconnect and circuit breaker for overcurrent protection provided in the exclusive line.

3.To prevent possible hazard due to insulation failure, the unit must be grounded.

4.Each wiring connection must be done tightly and in accordance with the wiring system diagram. Wrong wiring may cause the unit to misoperate or become damaged.

5.Do not allowed wiring to touch the refrigerant tubing, compressor, or any moving parts of the fan.

6.Unauthorised changes in the internal wiring can be very dangerous.The manufacturer will accept no responsibility for any damage or misoperation that occurs as a result of such unauthorised changes.

Power Supply Wire (1.8m)

Wiring Cover

N(1)	2	3
Blue	Black	Brown	-Green	to outdoor unit (5m)
			Yellow	to outdoor unit (5m)
				Power connetion wire

Fig.15a (Cooling Only Model)

Power Supply Wire (1.8m)

			Wiring Cover
	N	22	4	5	5	Signal wire to
	N(1)		3	4	5	outdoor unit (5m)
Yellow-Green	Black		OrangeBrown	Violet	Orange	outdoor unit (5m)
	Black			Violet	Orange
	Blue Black			Violet	Green-
	Blue Black			Violet	Yellow	Power connetion wire
						to outdoor unit (5m)

Fig.15b (Heat Pump Model)

KC18AGH, SAP-K18AM specifications

The Haier SAP-K18AM and KC18AGH are part of Haier's innovative line of air conditioning solutions designed to provide efficient cooling and exceptional comfort in various environments. These models stand out for their blend of modern technology, user-friendly features, and energy efficiency.

One of the main features of the Haier SAP-K18AM is its powerful cooling capacity, which enables it to quickly lower indoor temperatures, making it ideal for larger spaces or warmer climates. With a cooling capacity of 18000 BTU, this model ensures that even during the hottest summer days, users can enjoy a refreshing indoor atmosphere. The unit operates quietly, allowing for peaceful relaxation or focused work without the disturbance of loud compressor noises.

The KC18AGH model is equipped with advanced inverter technology that adjusts the compressor speed according to the cooling demand. This feature not only enhances energy efficiency but also helps to maintain a consistent temperature throughout the space. The inverter technology significantly reduces electricity consumption compared to non-inverter models, making it an environmentally friendly choice.

Both models come with a range of convenient features, including multiple cooling and fan speed options, sleep mode, and a programmable timer. The sleep mode function gradually increases the temperature at night, ensuring a comfortable sleep environment while saving energy. The programmable timer allows users to set the air conditioning unit to operate only when needed, further optimizing energy use.

Additionally, the Haier SAP-K18AM and KC18AGH are designed with user comfort in mind. They come with an easy-to-use remote control, allowing for effortless adjustments from across the room. The units also include a self-cleaning feature that helps reduce mold and bacteria buildup, ensuring that the air quality remains high.

In conclusion, the Haier SAP-K18AM and KC18AGH air conditioners represent cutting-edge technology and design. With powerful cooling capabilities, energy-efficient inverter technology, and a suite of user-friendly features, these models are ideal for anyone looking to improve the comfort and quality of their indoor environment. Whether for residential or commercial use, Haier continues to set the standard in reliable and effective air conditioning solutions.