Astone Holdings Pty high quality speaker system instruction

Enjoy Perfect Music

5. Display state sketch map

Connecting iPod state

FM radio reception state

Clock state

Alarm time state

Function key of Remote control

1. : standby or play control key, control the whole product’s power

2. : mute key

3. : turn down the tweeter volume

4. : turn up the tweeter volume

5. STEP/AUTO: choice the broadcasting station by hand or automatic

6. ST/MONO: choice stereo or single track under FM mode

7. : turn up the whole product volume

8. : turn down the whole product volume

9. : play key, play or pause the iPod working

10. : Reverse key, control the backward track of iPod or choice the reverse station under FM mode

11. : Forward key, control the forward track of iPod or choice the froward station under FM mode

12. CLOCK: set up the clock

13. ALARM: set up the alarm time

14. : choice the iPod input

15. : choice the FM input

16. : choice the AUX input

III.Remote control operation instruction

Connect with the power supply, and open the power switch to relieve the standby state, then the machine is in working state. (could achieve this function on the control panel of machine)

1. Control the audio source

Please choose one of three modes on the remote control according to your input signal source mode:

A. iPod input B. FM input

C. AUX audio input

8www.astone.com.au

Enjoy Perfect Music

A. iPod signal input mode:

When iPod docks in the system, the control keys of iPod still could be used, but the volume adjust wheel will not adjust the i-Ballroom volume.

1.Press , play the previous song

2.Press , play the next song

3.Press , play or pause the iPod

4.Press , the whole unit will mute

5.Press TREBLE key to turn up or turn down the tweeter volume

B.FM mode:

Connect the FM antenna to antenna connector, and press the FM key to enter the FM mode.

1.Under the radio receiving status, press STEP/AUTO key to toggle the radio station selctor between manual and automatic

2.Press or , choose go back or go forward in frequency. Under STEP mode, choose go back or go forward in frequency step by step; under Auto mode, choose go back or go forward in frequency automatically

3.Press ST/MONO key, to switch between the stereo and the single track

4.Press TREBLE key, turn up or turn down the tweeter volume

5.Press , the whole unit will mute

C.AUX audio input mode:

1.Press TREBLE or key to turn up or turn down the tweeter volume

2.Press , the whole unit will mute

3.Press , will be inactive under this mode

2.Control the clock

Under the AUX or iPod mode, press “CLOCK” key to enter the clock set-up status, the default clock display is 00:00

(hour : minute): Press “CLOCK” key the first time and the front two numbers will blink, then you can adjust the hour by pressing

the ; Press “CLOCK” key a second time and the back two numbers will blink, then you can adjust the minute by pressing the key. Lastly, press “CLOCK” key to confirm the clock setting. (It can display the time normally when power supply is

continuous, and needs to be set up again after power off.)

3. Control the alarm time

Under the AUX or iPod mode, press ALARM key to enter the alarm set-up status, the default alarm display is R, which means the alarm time function is open. Press ALARM key a first time and the front two numbers will blink then you can adjust the hour by

pressing the ; press ALARM key a second time and the back two numbers will blink, then you can adjust the minute by

pressing ; at last, press ALARM key to confirm the alarm setting. (The alarm will go off every day when power supply is continuous; and needs to be reset again after power off.)

4. Control the video

Under iPod mode, adjust the iPod video setting to TV-OUT status, and connect the S-VIDEO connector to TV’s or any other video unit which has an S-VIDEO connector, then set up the TV or relevant video unit on S-VIDEO input status, at this time, the TV or video unit will play the iPod’s video content. (Please refer the iPod manual.)