8.5. Speaker Stand Mounting
The speaker can be mounted on the optional
Speaker unit
Machine screw M5 x 20 (with plain washer and spring washer)
Butterfly nut (supplied with the
Washer | 1 |
(supplied with | |
the |
Joint bracket
[Installation example]
A s h o l e s e a l s a r e adhered over the holes, remove them using a pointed tool before attaching the bracket.
2
Speaker bracket
3
3
Fixing bolt
M5 x 60
Bracket |
| |
(supplied with the | Note | |
Hexagon bolt | Mount the speaker so that it faces | |
within the range of 15º upward and | ||
(supplied with the | ||
downward. | ||
| ||
a |
15º
15º
b
Step 1. Attach the joint bracket to the speaker stand bracket using the speaker stand's supplied bolt and nut.
Step 2. Attach the speaker bracket to the speaker's bottom using the |
|
| |
supplied screws. | [Speaker angle vs. Bracket position] | ||
Step 3. Mount the speaker to the joint bracket by inserting the | a 15º upward | b 15º downward | |
|
| ||
speaker bracket into the joint bracket and loosely securing | 0° |
| |
the fixing bolt for temporary speaker installation. | 30° | ||
| |||
After adjusting the speaker's vertical mounting angle, tighten |
|
| |
the fixing bolt. |
|
| |
The speaker angle is adjustable in 7.5º steps. |
|
| |
The mating surfaces of the speaker bracket and joint bracket |
|
| |
are designed to interlock. Ensure that both parts are |
|
| |
securely engaged with each other after mounting is | Speaker bracket |
| |
complete. | Joint bracket | ||
|
| ||
Step 4. Connect the speaker cable to the input terminals.
Note
Use a terminal cover when installing the speaker outdoors. (Refer to p. 6 for terminal cover attachment.)
Note
For more information on mounting the bracket to the stand and stand usage, refer to the instruction manual enclosed with the
12