TOA Electronics F-1000BT, F-1000W Wall Mounting, When adjusting horizontal and vertical angles

Page 8

8.3. Wall Mounting

When adjusting horizontal and vertical angles:

Use the supplied wall bracket, joint bracket, and speaker bracket to permit adjustment of the horizontal and vertical* speaker coverage angles.

* Vertical installation.	Horizontal: Max. 82º, Vertical: Max. 45º downward
Horizontal installation. Horizontal: Max. 60º, Vertical: Max. 45º downward
[Wall bracket mounting dimensions]		[Installation example]

30 mm

30 mm

Speaker unit

4-ø6 mm

2

Hexagon bolt M6 x 12 (with plain washer and spring washer)

Wall bracket

Joint bracket	1

4

6

Fixing bolt M5 x 60

3[Vertical speaker installation] Speaker bracket

Vertical speaker mounting

Horizontal speaker mounting (indoor installation only)

[Horizontal speaker installation]

Speaker bracket

Machine screw	Machine screw
M5 x 20 (with plain	M5 x 20 (with plain
washer and spring	washer and spring
washer)	washer)
Speaker unit (rear)	Speaker unit (rear)

Step 1. Mount the wall bracket to the wall surface.

Match the orientation of the arrow label with the horizontal direction (left or right) the speaker faces.

Note: Hardware used for mounting the wall bracket to the wall is not supplied.

• Arrow label orientation (Viewed from top of brackets)

[Left-facing orientation]		[Right-facing orientation]

Wall bracket	Wall bracket
Arrow label	Arrow label
Joint bracket	Joint bracket

8

Image 8

Contents Speaker Systems Operating InstructionsTable of Contents Safety Precautions Safety Symbol and Message ConventionsWhen Installing the Unit When the Unit is in UseGeneral Description FeaturesDimensional Diagram About the Input Overload Protection Circuitry 1000B and F-1000W onlyWall and pole 0º horizontal to 45º downward Terminal Cover UseSpeaker Cable Connections InstallationUsing the Supplied Brackets Arrow label orientation Viewed from top of brackets When adjusting horizontal and vertical anglesWall Mounting Changing the orientation of the front panel logo Mounting the speaker close to a wall surfaceMount the joint bracket to the ceiling surface Ceiling MountingVertical orientation Installation example Speaker Stand Mounting Pole Mounting F-1000BTWP and F-1000WTWP only Vertical speaker mounting Horizontal speaker mounting Repainting the Speaker Detaching the mesh grillSpecifications 10.1. F-1000B and F-1000W10.2. F-1000BT and F-1000WT 10.3. F-1000BTWP and F-1000WTWP IPX4