TOA Electronics F-1000WTWP, F-1000BTWP operating instructions Table of Contents

Page 2

TABLE OF CONTENTS
1.	SAFETY PRECAUTIONS	3
2.	GENERAL DESCRIPTION	4
3.	FEATURES	4
4.	DIMENSIONAL DIAGRAM	4
5.	IMPEDANCE CHANGE
	(F-1000BT, F-1000BTWP, F-1000WT, and F-1000WTWP only)	5
6.	ABOUT THE INPUT OVERLOAD PROTECTION CIRCUITRY
	(F-1000B and F-1000W only)	5
7.	NOTES ON OUTDOOR INSTALLATION
	(F-1000BTWP and F-1000WTWP only)	6
8.	INSTALLATION
	8.1. Using the Supplied Brackets
	8.1.1. When using only the supplied brackets	7
	8.1.2. When using both the supplied and optional mounting brackets	7
	8.2. Speaker Cable Connections	7
	8.3. Wall Mounting	8
	8.4. Ceiling Mounting	10
	8.5. Speaker Stand Mounting	12
	8.6. Pole Mounting	13
	8.7. Partition Board Mounting
	(F-1000B, F-1000BT, F-1000W, and F-1000WT only)	14
9.	REPAINTING THE SPEAKER	15
10. SPECIFICATIONS
	10.1. F-1000B and F-1000W	16
	10.2. F-1000BT and F-1000WT	17
	10.3. F-1000BTWP and F-1000WTWP	18

2

Image 2

Contents Speaker Systems Operating InstructionsTable of Contents When Installing the Unit Safety PrecautionsSafety Symbol and Message Conventions When the Unit is in UseGeneral Description FeaturesDimensional Diagram About the Input Overload Protection Circuitry 1000B and F-1000W onlyWall and pole 0º horizontal to 45º downward Terminal Cover UseSpeaker Cable Connections InstallationUsing the Supplied Brackets Arrow label orientation Viewed from top of brackets When adjusting horizontal and vertical anglesWall Mounting Changing the orientation of the front panel logo Mounting the speaker close to a wall surfaceMount the joint bracket to the ceiling surface Ceiling MountingVertical orientation Installation example Speaker Stand Mounting Pole Mounting F-1000BTWP and F-1000WTWP only Vertical speaker mounting Horizontal speaker mounting Repainting the Speaker Detaching the mesh grillSpecifications 10.1. F-1000B and F-1000W10.2. F-1000BT and F-1000WT 10.3. F-1000BTWP and F-1000WTWP IPX4