TOA Electronics F-1000WTWP, F-1000BT General Description, Features, Dimensional Diagram

Page 4

2. GENERAL DESCRIPTION

TOA's F-1000 Series Speakers are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application.

3. FEATURES

•90º horizontal x 90º vertical wide directivity high-frequency horn.

•Supplied bracket permits mounting to a wall, ceiling, or an optional speaker stand.

•Combined use of the supplied bracket and optional mounting bracket allows the speakers to be mounted in many different applications, including pole mounting,*1 clusters, horizontal ceiling mounting*2, and partition board mounting*2.

•Both the F-1000BTWP and F-1000WTWP feature a waterproof design (IPX4 standard) for protection from any adverse effects of outdoor installations.

*1 Applies to the F-1000BTWP and F-1000WTWP.

*2 Applies to the F-1000B, F-1000BT, F-1000W, and F-1000WT.

4. DIMENSIONAL DIAGRAM

Unit: mm

[Top][Bottom]

Mounting holes

Note

Hole seals are adhered over the holes at the factory. Before attaching the speaker mounting bracket to this side, remove them using a pointed tool.

[Front]

202

130

[Side][Rear]

2-M5 mounting screw hole

131

(Effective screw depth: 14 mm)

 

 

15º

30

30

2-M5 mounting screw hole (Effective screw depth: 14 mm)

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Speaker Systems Operating InstructionsTable of Contents Safety Precautions Safety Symbol and Message ConventionsWhen Installing the Unit When the Unit is in UseDimensional Diagram FeaturesGeneral Description About the Input Overload Protection Circuitry 1000B and F-1000W onlyWall and pole 0º horizontal to 45º downward Terminal Cover UseUsing the Supplied Brackets InstallationSpeaker Cable Connections Wall Mounting When adjusting horizontal and vertical anglesArrow label orientation Viewed from top of brackets Changing the orientation of the front panel logo Mounting the speaker close to a wall surfaceVertical orientation Ceiling MountingMount the joint bracket to the ceiling surface Installation example Speaker Stand Mounting Pole Mounting F-1000BTWP and F-1000WTWP only Vertical speaker mounting Horizontal speaker mounting Repainting the Speaker Detaching the mesh grillSpecifications 10.1. F-1000B and F-1000W10.2. F-1000BT and F-1000WT 10.3. F-1000BTWP and F-1000WTWP IPX4
Top Page Image Contents