TOA Electronics F-1000WT, F-1000B Safety Precautions, Safety Symbol and Message Conventions

Page 3

1. SAFETY PRECAUTIONS

Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation.

Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety.

After reading, keep this manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could result from mishandling. Before operating your product, read this manual first and understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.

WARNING

Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury.

When Installing the Unit

Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket. Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.

Do not use other methods than specified to mount the bracket. Extreme force is applied to the unit and the unit could fall off, possibly resulting in personal injuries.

Use nuts and bolts that are appropriate for the ceiling's or wall's structure and composition. Failure to do so may cause the speaker to fall, resulting in material damage and possible personal injury.

Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after installation to prevent accidents that could result in personal injury.

Do not mount the unit in locations exposed to constant vibration. The mounting bracket can be damaged by excessive vibration, potentially causing the unit to fall, which could result in personal injury.

(F-1000B, F-1000BT, F-1000W, F-1000WT only) Since the unit is designed for in-door use, do not install it outdoors. If installed outdoors, the aging of parts causes the unit to fall off, resulting in personal injury. Also, when it gets wet with rain, there is a danger of electric shock.

(F-1000BTWP, F-1000WTWP only)

When installing the unit in the snowy area, take appropriate measures to prevent snow from lying on the unit. If the snow lies on the unit, the unit may fall, causing personal injuries.

Do not use anti-rust lubricant. If it contacts resin or rubber parts, they could deteriorate and cause the unit to fall, possibly resulting in personal injury.

Avoid installing the speaker in locations close to the seashore or in indoor swimming facilities that are not well ventilated. In such locations the bracket may be vulnerable to corrosion, eventually allowing the speaker to fall resulting in personal injury.

CAUTION

Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.

When Installing the Unit

Avoid touching the unit's sharp metal edge to prevent injury.

To avoid electric shocks, be sure to switch off the unit's power when connecting speakers.

When the Unit is in Use

Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.

Do not operate the unit for an extended period of time with the sound distorting. This is an indication of a malfunction, which in turn can cause heat to generate and result in a fire.

Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in personal injury and/or property damage.

Have the unit checked periodically by the shop from where it was purchased. Failure to do so may result in corrosion or damage to the unit or its mounting bracket that could cause the unit to fall, possibly causing personal injury.

3

Image 3
Contents Operating Instructions Speaker SystemsTable of Contents When the Unit is in Use Safety PrecautionsSafety Symbol and Message Conventions When Installing the UnitFeatures Dimensional DiagramGeneral Description 1000B and F-1000W only About the Input Overload Protection CircuitryTerminal Cover Use Wall and pole 0º horizontal to 45º downwardInstallation Using the Supplied BracketsSpeaker Cable Connections When adjusting horizontal and vertical angles Wall MountingArrow label orientation Viewed from top of brackets Mounting the speaker close to a wall surface Changing the orientation of the front panel logoCeiling Mounting Vertical orientationMount the joint bracket to the ceiling surface Installation example Speaker Stand Mounting Pole Mounting F-1000BTWP and F-1000WTWP only Vertical speaker mounting Horizontal speaker mounting Detaching the mesh grill Repainting the Speaker10.1. F-1000B and F-1000W Specifications10.2. F-1000BT and F-1000WT IPX4 10.3. F-1000BTWP and F-1000WTWP