TOA Electronics F-1000BTWP, F-1000WTWP operating instructions Installation example

Page 11
Use the supplied joint bracket and speaker bracket in combination with the optional HY-CM10B or HY-CM10W Ceiling Mount Bracket.
Refer to the instruction manual enclosed with the optional mounting bracket for its mounting details.

Step 3. Mount the speaker to the joint bracket by inserting the speaker bracket into the joint bracket and loosely securing the fixing bolt for temporary speaker installation.

Step 4. Connect the speaker cable to the input terminal.

Note

Use a terminal cover when installing the speaker outdoors. (Refer to p. 6 for terminal cover attachment.)

Step 5. Adjust the speaker's vertical mounting angle and tighten the fixing bolt.

The speaker angle is adjustable in 7.5º steps.

Note

The mating surfaces of the speaker bracket and joint bracket are designed to interlock. Ensure that both parts are securely engaged with each other after mounting is complete.

Horizontal orientation (F-1000B, F-1000BT, F-1000W, and F-1000WT only)

[Installation example]

Cluster configuration assembly (F-1000B, F-1000BT, F-1000W, and F-1000WT only)

Use the supplied joint brackets and speaker brackets in combination with the optional HY-CL10B Cluster Bracket to permit a total of 4 speakers to be suspended from the ceiling as shown in the figure at right.

Refer to the instruction manual enclosed with the optional mounting bracket for its mounting details.

[Installation example]

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operating Instructions Speaker SystemsTable of Contents When the Unit is in Use Safety PrecautionsSafety Symbol and Message Conventions When Installing the UnitGeneral Description FeaturesDimensional Diagram 1000B and F-1000W only About the Input Overload Protection CircuitryTerminal Cover Use Wall and pole 0º horizontal to 45º downwardSpeaker Cable Connections InstallationUsing the Supplied Brackets Arrow label orientation Viewed from top of brackets When adjusting horizontal and vertical anglesWall Mounting Mounting the speaker close to a wall surface Changing the orientation of the front panel logoMount the joint bracket to the ceiling surface Ceiling MountingVertical orientation Installation example Speaker Stand Mounting Pole Mounting F-1000BTWP and F-1000WTWP only Vertical speaker mounting Horizontal speaker mounting Detaching the mesh grill Repainting the Speaker10.1. F-1000B and F-1000W Specifications10.2. F-1000BT and F-1000WT IPX4 10.3. F-1000BTWP and F-1000WTWP
Top Page Image Contents