Graco 3A1334E Follow Plate Grease Models Only, Air Line and Accessories

Page 9

Installation

Air Line and Accessories

NOTE: Install the air line accessories in the order shown in the Typical Installation on page 7.

NOTICE

Do not hang the air accessories directly on the air inlet. Mount them on brackets. Always use a flexible hose between all connections. The air inlet is not strong enough to support accessories and may cause one or more to break.

•Use thread sealant on all male threads except swivel connections.

•Install a pump runaway valve (D) to shut off the air to the pump if the pump accelerates beyond the pre-adjusted setting. A pump that runs too fast can be seriously damaged.

•Install the air regulator (G) to control pump speed and pressure.

For NPT models order Graco Part No. 24H420 or for BSP models order Graco Part No. 24H419.

•Install a bleed-type master air valve (F) upstream from the pump air regulator (G) but within easy reach of the pump.

For NPT models order Graco Part No. 110223 or for BSP models order Graco Part No. 125272.

•On the main air supply line from the compressor, install an air line filter (H) to remove harmful dirt and contaminants from the compressor air supply.

Follow Plate - Grease Models Only

For grease models only a follow plate is required for pumping fluid from the drum. See page 12 for follow plate installation instructions.

3A1334E

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Important Safety Instructions Related Translated ManualsManual Number Language Pumps Oil Pump ModelsGrease Pump Models Skin Injection Hazard Equipment Misuse Hazard Grounding InstallationTypical Installation Stationary MountingsKey FIG Installing Outlet Hose FIG Installation GuidelinesStationary Mounting Layout Pump MountingFollow Plate Grease Models Only Air Line and AccessoriesOperation Thermal Induced Pressure Relief Oil pumps onlyThermal Relief Theory of Operation Pressure Relief Procedure Determining Output Pressure Using the Air RegulatorStart-up Relieve pressure, Is for Oil Pumps OnlyOperation Replacing Pilot Valves RepairDescription Qty PartsThroat and Piston Seal Replacement Kit 24H853 FIG Related Oil Pump KitsKit No Description Qty 21 20 KitsMUFFLER, 3/8 Grease Pump Models 24G600 24G608Throat and Piston Seal Replacement Kit 24H854 FIG Ring and Seal Replacement Kit 24H856 FIGRelated Grease Pump Kits Kits, Replace Seals or Rebuild Air Valve Kits Oil or Grease Pump Air Valve Repair and Replacement KitsAir Valve Seal Kit 24H851 Air Valve Repair Kit 24H798Pilot Valve Replacement Kit 24H749 Troubleshooting Problem Cause SolutionOil Models Replace gasket Relieve pressure Grease Models31 or 51 Oil Models Technical DataDimensions Oil Models Performance CurvePerformance Curve Tested with ISO 46 Hyd Oil Grease ModelsDimensions 3A1334E Graco Information Graco Standard Warranty
Top Page Image Contents