Graco 3A1334E important safety instructions Equipment Misuse Hazard

Page 5

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS forms from distributor or retailer.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manufacturer’s replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or property damage.

•Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.

•Many other fluids may contain chemicals that can react with aluminum. Contact your material supplier for compatibility.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This equipment includes but is not limited to:

•Protective eyewear, and hearing protection.

•Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

3A1334E

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual Number Language Important Safety InstructionsRelated Translated Manuals Pumps Oil Pump ModelsGrease Pump Models Skin Injection Hazard Equipment Misuse Hazard Grounding InstallationKey FIG Typical InstallationStationary Mountings Installing Outlet Hose FIG Installation GuidelinesStationary Mounting Layout Pump MountingFollow Plate Grease Models Only Air Line and AccessoriesThermal Relief Theory of Operation OperationThermal Induced Pressure Relief Oil pumps only Start-up Pressure Relief ProcedureDetermining Output Pressure Using the Air Regulator Relieve pressure, Is for Oil Pumps OnlyOperation Replacing Pilot Valves RepairDescription Qty PartsKit No Description Qty Throat and Piston Seal Replacement Kit 24H853 FIGRelated Oil Pump Kits 21 20 KitsMUFFLER, 3/8 Grease Pump Models 24G600 24G608Related Grease Pump Kits Throat and Piston Seal Replacement Kit 24H854 FIGRing and Seal Replacement Kit 24H856 FIG Kits, Replace Seals or Rebuild Air Valve Kits Oil or Grease Pump Air Valve Repair and Replacement KitsAir Valve Seal Kit 24H851 Air Valve Repair Kit 24H798Pilot Valve Replacement Kit 24H749 Oil Models TroubleshootingProblem Cause Solution Replace gasket Relieve pressure Grease Models31 or 51 Oil Models Technical DataDimensions Oil Models Performance CurvePerformance Curve Tested with ISO 46 Hyd Oil Grease ModelsDimensions 3A1334E Graco Information Graco Standard Warranty
Top Page Image Contents