1Insert the
2Insert the
3Put in the white plug of the audio/video chinch cable, not included in the delivery contents in the chinch jack inscribed with„FL“ on the rear side of the DVD player.
4Insert the white plug on the other end of the audio/video chinch cable in the audio socket for the left channel on the television.
5Insert the red plug of the audio/video chinch cable in the “FR” chinch socket at the back of the DVD Player.
6Insert the red plug on the other end of the audio/video chinch cable in the audio socket for the right channel on the television.
7Set the television to the AV channel that is to reproduce the
➧For this subject please also refer to Chapter 9.3.“Video Settings: Setting Video Output”.
.. Connection to a television via video input (Composite Video)
If the television to which the DVD Player is to be connected is …
•not
•not have a SCART socket, but does have chinch sockets
…then the DVD Player can be connected to the television via the video input (the
Proceed as follows for this purpose …
1Put in the yellow plug of the audio/video chinch cable, in the „video“ socket marked in yellow on the rear side of the DVD player.
2Insert the yellow plug on the other end of the audio/video chinch cable into the corresponding chinch socket of the television
3Insert the white plug of the audio/video chinch cable in the “FL” chinch socket on the back of the DVD Player.
4Then insert the white plug on the other end of the audio/ video chinch cable into the audio socket for the left chan- nel on the television.
5Insert the red plug of the audio/video chinch cable into the “FR” chinch socket on the back of the DVD Player.
6Insert the red plug on the other end of the audio/video chinch cable in the audio socket for the right channel on the television.
7Check the operating instructions for the given television if any settings have to be made on the television in order to be able to operate the DVD Player.
➧For this subject please also refer to Chapter 9.3.“Video Settings: Setting Video Output”.