8.Connecting Audio-Components to the DVD Player
In addition to sound reproduction of
•the speakers of the television to which the DVD Player is connection, or
…the sound can also be reproduced by external audio com- ponents such as HiFi systems, Dolby Digital/DTS receivers or
The following possibilities are available:
.. Connecting a HiFi system
To play DVDs,
•Whether the HiFi system is suitable for connection to a DVD Player. If yes …
•Whether the HiFi system has chinch sockets. If yes …
Proceed as follows to connect the DVD Player to a hifi system …
1Insert the white plug of the chinch cable in the“L”chinch socket on the back of the DVD player.
2Insert the white plug on the other end of the chinch ca- ble in the chinch socket for the left channel on the HiFi system.
3Insert the red plug of the chinch cable in the “R” chinch socket at the back of the DVD Player.
4Insert the red plug on the other end of the chinch cable in the chinch socket for the right channel on the HiFi system.
5Refer to the operating instructions to find out whether any settings have to be made on the HiFi system to repro- duce the sound of a DVD,
Please note:
For an optimal sound experience set up the speakers of the HiFi system to the right and left of the television to which the DVD Player is connected.
If the DVD Player has been connected to the televi- sion with a SCART cable, then the audio signals will be transmitted both via the chinch cable to the HiFi system and via the SCART cable to the television. In this case set the minimum sound volume on the tel- evision if the sound is to be reproduced by the HiFi system.
.. Connecting digial audio components via digital cables
To enjoy stereophonic sound with DVDs,
The necessary cables for the subsequently described con- nection method are available from your local dealer.
Check the operating instructions for the given audio compo- nent whether it can be connected to a DVD Player …