. Inserting memory cards with MP/WMA/ DivX/Nero Digital/JPEG files
Note:
The
The
Always only insert one memory card in the
In order to insert memory cards of types CFI/CFII , SD, MS/ MSPro, MMC and SM into the
1Switch on the television connected to the
2Make certain that the DVD player is ready for operation and switched on.
If the television, the DVD player and any additionally connected equipment (e.g. an audio component) are ready for operation and switched on and the DVD player is correctly connected to the television, you will see the OPENING logo on the television screen.
If no disc is present in the disc tray of the DVD player:„No Disc“ is displayed on the television screen.
3Open the flap in front of the memory card slot on the front side of the DVD player. To do this, press once with your finger on the dotted triangle on the flap. The flap opens.
4Now slide the memory card into one of the two memory card slots. Follow the steps below – depending on which type of memory card you would like to play.
Warning!
Always be sure to insert the memory cards into the memory card slots as described below! Never bend the memory cards while inserting them into the memory cards slots! Only push the memory cards up to the stop in the memory card slot with a light pressure. If memory cards cannot be inserted without apply- ing force:
•Check whether it is a type of memory card that the DVD player can play. Only memory cards of types CF I/CF II, SD, MS/MSPro, MMC and SM can be played. Do not try to insert memory cards of other types into one of the memory card slots!
•Check whether you have inserted the memory card into the memory card slot in the correct direction.
•Never try to insert memory cards into the memory card slots using force!
This could result in irreparable damage to the DVD player, memory card and the files on the memory card!
SmartMedia Memory Cards (SM)
Note:
Only SmartMedia memory cards of type 3.3 V can be used! SmartMedia memory cards of type 5 V cannot be used! SmartMedia memory cards of types 3.3 V and 5 V can easily be differentiated according to the diagram below:
5 Volt 3,3 Volt
You must insert SmartMedia memory cards (3,3V) into the upper memory card compartment. Insert
-the side of the memory card with the contacts must face up and
-the slanted edge of the memory card must face right.
CompactFlash memory cards (CF I/CF II)
CompactFlash memory cards types 1 and 2 must be inserted into the bottom memory card compartment. Insert CFmemo- ry cards into the upper memory card compartment contacts first and straight.
The side of the memory card with the manufacturer‘s logo label must face up.
MultiMediaCard /SecureDigital memory cards
MultiMediaCard/SecureDigital memory cards must be in- serted into the upper memory card compartment. Insert MMC/SD memory cards into the upper memory card com- partment contacts first and straight.
For this purpose...
-the side of the memory card with the contacts must face down and
-the slanted edge of the memory card must face right.