Kompernass KH 6504 operating instructions Connecting the antenna, Connecting the wand antenna

Playback of an external devices audio and video signals with the DVD player

You can playback images and sound from an external device via the DVD player.

1.For sound transmissions insert the audio cinch cable's red jack plug into the AUDIO IN/OUT COAX socket of the DVD player.

2.Insert the white and red cinch plugs of the audio cinch cable into the corresponding audio output of the external device.

3.Insert the video cable's yellow jack plug into the VIDEO IN/OUT socket of the DVD player.

4.Connect the cinch socket of the video cinch cable with the corresponding video output of the external device.

5.Switch on the DVD player and the external device.

6.In order to playback the external device's audio and video signals press the AV button on the remote control.

7.In order to switch back to the DVD player's display press the DVD/USB/CARD button.

Note:

Depending on the data carrier the display can remain black for a few seconds until the DVD players image is again displayed.

Note:

The sound of an external device connected to the DVD players audio input will also playback if the device is set to an operating mode other than AV.

6.4 Connecting the antenna

For reception of an analogue TV signal the DVD player must have an antenna connected to it.

This can be achieved by connecting to your house antenna via an antenna cable or with the supplied wand antenna.

Connecting the wand antenna

1.Insert the plug of the supplied wand antenna into the ANT socket on the side of the DVD player.

2.For mobile operation place the wand antenna close to the DVD player.

- 12 -