CHROMA
Here you set the television standard PAL or
SECAM. In the AUTO setting the television standard is set automatically.
SKIP
• With the control buttons tuned the skip function to ON to skip over the currently tuned station so that by interconnection of the station it will no longer be displayed.
•To show the station again, in the function POSITION insert the corresponding station and subsequently set the skip function to OFF.
FINE
Press the control buttons repeatedly to fine tune the frequency for the currently indicated channel backwards or forwards.
AUTO-SEARCH
•Select this input and press the control button to start an automatic station search.
Note:
Before starting a station search make sure that you have connected the system to an antenna correctly as described in section 6.4 Connec- ting an antenna.
Thereby the stations found will be filed, one after the other, in the programme cells.
After the end of the search the first found station on programme cell 01 will playback.
•To cancel the search press the control button
.
SEARCH
•In the function POSITION set the station, on who- se programme cell you want to start a search.
•Select the input SEARCH and press the control
buttons to start a manual station search backwards or forwards.
The station search stops at the first found station.
Button functions in the TV mode
Fine tuning
•During the TV playback press the SLOW/FINE button. The currently tuned frequency appears in the right top corner of the display.
• With the buttons PREV DOWN/NEXT | UP on |
the remote control and/or PREV/NEXT | /or |
/on the device you can now fine tune the frequency backwards or forwards.
Programming stations
•Tune to the desired station frequency and then
press the REV /MEM button.
•The channel number in the right top corner of the display is shown in red.
•With the number buttons enter the desired station channel number.
•Press the REV /MEM button again. The channel number is now green and the station is saved in the memory cell.
Automatic search function
• Hold one of the buttons PREV DOWN/NEXT UP on the remote control and/or PREV/NEXT /
or / on the device down for about 2 se- conds during the TV playback to start an auto- matic station search backwards/forwards.
•The search starts immediately from the currently playing back frequency.
•To cancel the search hold down one of the but-
tons PREV DOWN/NEXT | UP on the remote con- | |
trol and/or PREV/NEXT | /or | /on the |
device again for about 2 seconds. |
| |
- 32 -