•Arrange for customer service to repair or replace connecting cables and/or devices that are not functioning properly or have been damaged.
Never submerge the device or the power cable in water. Wipe it only with a slightly damp cloth.
•Do not expose the device to rain and never use it in a humid or wet environment.
•Ensure that the power cable never becomes wet during operation.
•You must not open the housing or repair the device yourself. Should you do so, device safety can no longer be assured and the warranty will become void.
•Protect the device against drip and spray wa- ter. Do not place any
Risk of fire!
•Do not use the device in the vicinity of hot sur- faces.
•Do not locate the device in places exposed to direct sunlight, If you do, it may overheat and become irreparably damaged.
•Do not leave the device unattended when in use.
•Never cover the ventilation slots of the device while it is being used.
•Do not place any open sources of fire, like candles, on the device.
Injury hazard
•Keep children away from the connecting cable and the device. Children frequently underestimate the dangers of electrical appliances.
•Make sure to find a safe place for the device.
•Do not operate the device if it has sustained a fall or is damaged. Arrange for the device to be checked and/or repaired by qualified technicians.
•Keep batteries away from children. Children can put batteries into their mouths and swallow them.
Danger! Laser radiation!
The device is fitted with a „Class 1 Laser“.
•Never open the device.
•Never attempt to repair the device.
•There is invisible laser radiation inside the device. Do not expose yourself to the laser beam.
Note:
Some aggressive furniture finishes can have a destructive influence on the device's rubber feet. If necessary, place the device on a nonslip pad.
Thunderstorms!
Equipment connected to a power supply can be damaged during a thunderstorm. Therefore during thunderstorms always pull the mains plug from the mains socket and remove the antenna cable from the device.
Notice regarding electrical power surges (EFT / electrical fast transient) and electro- static discharges:
In a case of malfunction due to an electrical fast transient (power surge) and/or electrostatic discharge, the device must be returned to default settings in order to
- 4 -