Connecting the antenna cable
1.Insert your house antenna's 75Ω antenna cable plug into the ANT socket on the side of the DVD player.
6.5 Headphone connection
Attention!
Only use the supplied type HX206-001 headphones.
You can connect headphones with a 3.5 mm stereo jack plug to the DVD player. The headphones con- nection is located on the side of the device. When you have connected the headphones, the loudspeakers are disconnected and you will only hear sound via the headphones.
•Insert the jack plug of the headphones into the headphone connection.
Important!
Listening to music with headphones for long periods and at high volume levels can lead to hearing damage!
7. Use
•Carry out the required connections as descri- bed in chapter 6 and provide a power supply.
•Lift up the TFT display screen.
7.1 Switching the DVD player on and off
•Set the POWER ON/OFF switch to the ON position to switch the DVD player on.
The TFT display screen switches on and the back- ground image appears.
If no disc is inserted into the disc tray the notice LOADING will appear briefly followed by the notice NO DISC.
•To switch the DVD player off again set the POWER ON/OFF switch to the OFF position.
7.2 Operation
Buttons on the device and the remote control
Most of the functions described in this manual can be set using the buttons on the remote control or also the buttons on the device. However, in these instructions the buttons on the remote control are described. If a button on the device is meant this will be specifically mentioned.
Display settings
•Press the FUNCTION button to access the display settings. The settings can be accessed at any time.
•With the control buttons select one of the inputs
Bright, Contrast, Color, Zoom or Reset.
• With the control buttons | you can |
change the value. |
|
•To exit the settings press the FUNCTION button again.
•To reset the setting select the input Reset and press the control button .
- 13 -