Status indicator
•During playback press the STA/FRQ button to show either the currently tuned frequency or the channel number in the display.
• With the buttons PREV DOWN/NEXT | UP on |
the remote control and/or PREV/NEXT | / |
or / on the device you can now tune the channel number/frequency.
15. Cleaning of the DVD player
•Clean the housing of the DVD player exclusive- ly with a soft damp cloth and a mild washing- up liquid. When cleaning, make sure that no
moisture gets into the DVD player!
Clean the inside of the disc tray – if necessary – with a clean, dry brush only (e.g. lens cleaning brush, available from camera stores). Never clean the inside of the disc tray with anything moist!
Warning!
Moisture penetrating into the DVD player crea- tes the risk of an electric shock! The DVD play- er may also be irreparably damaged!
16. Troubleshooting
Display is blank/DVD player shows no functions even though it is switched on
ACheck to see that the power cord is properly plugged into the power socket.
BCheck to see if the power socket, in which you have plugged the power cord of the power sup- ply unit/vehicle adapter is supplying power by connecting to it another device. If necessary plug the power cord of the power supply unit/vehicle adapter into another power socket.
CSwitch off the DVD player by pressing the POWER ON/OFF button and then wait ten seconds. Then switch the DVD player back on by pres- sing the POWER ON/OFF button.
The display shows "No Disc" even though there is a disc inserted
AThe disc is dirty, scratched or damaged. Clean the disc or insert another disc.
BThe Country/Region code on the inserted
Inserted disc will not playback
It is possible that a layer of condensation has built up on the DVD players laser scan lens. This can be the case especially if the DVD player has been subjected to strong temperature fluctuations.
If this is the case place the DVD player in a dry en- vironment at normal room temperature. First remove the currently inserted disc from the disc tray. Then leave the DVD player switched off for at least one hour without using until the condensation film has evaporated.
- 33 -