Greenheck Fan MSCF-BI, MSCF-FC manual Installation, Operation and Maintenance Manual

Page 1

 

Part #462888

®

Modular Small Cabinet Fan

Installation, Operation and Maintenance Manual

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Model MSCF-BI

Model MSCF-FC

General Safety Information

Only qualified personnel should install this unit. Personnel should have a clear understanding of these instructions and should be aware of general safety precautions. Improper installation can result in electric shock, possible injury due to coming in contact with moving parts, as well as other potential hazards. Other considerations may be required if high winds or seismic activity are present. If more information

is needed, contact a licensed professional engineer before moving forward.

1.Follow all local electrical and safety codes, as well as the National Electrical Code (NEC), the National Fire Protection Agency (NFPA), where applicable. Follow the Canadian Electric Code (CEC) in Canada.

DANGER

Always disconnect power before working on or near a unit. Lock and tag the disconnect switch or breaker to prevent accidental power up.

CAUTION

When servicing the unit, motor may be hot enough to cause pain or injury. Allow motor to cool before servicing.

2.The rotation of the wheel is critical. It must be free to rotate without striking or rubbing any stationary objects.

3.Motor must be securely and adequately grounded.

4.Do not spin fan wheel faster than the maximum cataloged fan rpm. Adjustments to fan speed significantly affects motor load. If the fan RPM is changed, the motor current should be checked to make sure it is not exceeding the motor nameplate amps.

5.Do not allow the power cable to kink or come in contact with oil, grease, hot surfaces,

or chemicals. Replace cord immediately if damaged.

6.Verify that the power source is compatible with the equipment.

7.Never open blower access doors while the fan is running.

1 Model MSCF Modular Small Cabinet Fan

®

Image 1
Contents General Safety Information Installation, Operation and Maintenance ManualService Clearance Inspection and Maintenance during StorageReceiving UnpackingUnit Layout Table of ContentsHanging Instructions Mounting InstructionsExternal Mounting Isolation Modular Construction Mscf Mounting DimensionsHorizontal Hanging Weights Dimensional DataFilter Sizes and Quantity Coil Dimensions Airflow Coil is circuited to the top distributor. With First suction header on the entering air sideAirflow from left to right, the fluid enters the coil From the center connection Inlet and exits fromSystem Start-Up Symptom Possible Cause Corrective Action TroubleshootingHot Water and Chilled Water Start-Up of Coil ModuleSteam Coils Direct Expansion DX CoilsTraps Drain Pan / Drain TrapControls Freezing Conditions entering air below 35FElectrical Wiring Instructions Installation of Electric Heater optionalSizing of Supply Conductors Calculation of Line Currents ampsSequence of Operation Electric Heater Two Weeks after Start-Up Fan MaintenanceEvery Three 3 Months YearlyDrain Pan Maintenance Coil MaintenanceStart-Up Documentation Maintenance Log Maintenance Log Warranty