Mounting Instructions
Greenheck’s Modular Small Cabinet Fan (MSCF) should be lifted by the factory supplied lifting lugs (see Figure 1) or frame rails and a spreader bar
(see Figure 2) to prevent damage from occurring to the equipment. Avoid twisting or uneven lifting of equipment. Do not lift equipment by coil connections or headers. The unit must remain upright during lifting. All access doors and panels must be closed during lifting to avoid damage.
Spreader Bar
Lifting lugs
Figure 1
Spreader Bar
Frame Rails
(by others)
Figure 2
Hanging Instructions
The MSCF should be hung by the factory supplied lifting lugs or field supplied frame rails as shown respectively in Figures 3 and 4. The number of hanging brackets used will be determined by the number of fan modules.
Figure 3
Figure 4
External Mounting Isolation
The MSCF is available with external neoprene or spring isolation options. When external isolation is selected, a bridge bracket will be provided to reduce installation time (see Figure 5).
Two required per assembly
3/4 inch Flat Washer
One per assembly as needed
Two required per assembly
Bridge Bracket
Part No. 711779
Drawing No. 89814 | Hanging Bracket |
One required per assembly | Part No. 710774 |
Hanging Bracket | Drawing No. 85537 |
| |
Part No. 710774 |
|
Drawing No. 85537 | |
| |
| Two required per assembly |
HANGING ASSEMBLY | Bridge Bracket |
| |
| Part No. 711779 |
| Drawing No. 89814 |
| One required per assembly |
| 3.0 inch |
Figure 5 | 3/4 inch Flat Washer |
One required per assembly | |
| |
| Two required per assembly |
BASE ASSEMBLY
4 Model MSCF Modular Small Cabinet Fan
®