Honeywell TE821WD user manual

Page 12

A.UP

B.DOWN

C.SET

D.CHANNEL

E.MEMORY

F.HISTORY

G ALARM/CHART

H. SENSOR

–AUTO, ON, OFF I. SENSITIVITY

–HIGH/LOW

J LIGHT/SNOOZE

K. AC/ DC ADAPTOR INPUT

-Selects the next available window counter-clockwise

-Increases parameters

-If pressed and help, activates an atomic time signal search

-Selects the next available window clockwise

-Decreases parameters

-If pressed and help, activates all remote sensors signal search

-Alternates the parameters for the selected window

-If depressed and held, enters into the programming mode or changes parameter’s units

-Pressed again closes programming mode and confirms selected parameters

-Manually selects the channel # for receiving temperature and humidity sensor data

-Enables the temperature and humidity channel auto-scan mode

-Records: moon phase, temperature, humidity, rainfall and wind records. Then stores in memory

-Moon phase: Determined by the day of month interval

-Sets and stores pressure & altitude units in Memory

-Allows displaying the sea-level pressure history

-Displays alarm times and programmed alerts for temperature, rainfall and wind.

-Press and hold, to enter the alarm/alert programming mode

-Press and hold in pressure and forecast window, to view different bar charts

-Sets the light sensor to: automatic, on or off

-Adjusts the automatic light sensor sensitivity

-Illuminates the display backlight for 5 seconds

-Activates Snooze delay for alarms (programmable 1 to 15 minutes)

-Connects main unit to the power outlet through the AC to 7.5V DC adapter provided

12

Image 12

Contents Honeywell Table of Contents Appendix City Codes SpecificationsStandard Package Contents InstallationIntroduction Before you beginFeatures Thermo-Hygrometer Sensor TS33CPlacement tips MountingRain Gauge TS906 Anemometer wind sensor TS805 Wind Vane Assembly Main Unit Aligning TimeWeather DisplayAvoid placing the main unit in the following areas Buttons and Controls Page Initial Set up Clock and Alarms Window Clock and Calendar DisplaysOperation and Window Selection Selecting Clock and Alarm Window Initial Settings City, Time, Date and LanguageCustom Weather Station Settings Pressure and Weather Forecast WindowSelect Pressure and Weather Forecast Window Pressure and Altitude InformationChanging Pressure and Altitude Paramet ers Changing or Setting Sea Level Pressure Changing or Setting AltitudeViewing the Sea Level Pressure History Viewing the Pressure, Temperature and Humidity Bar Charts Viewing the Moon Phase HistoryMoon Phas e Diagram Weather Forecast Displays Temperature and Humidity Window Temperature and Humidity DisplaySelecting Temperature and Humidity Window Viewing Temperature and Humidity for each ChannelTemperature and Dew Point Displays Temperature in Celsius or FahrenheitDisabling Temperature Alarm levels Viewing the Max/Min Channel Temperature and HumidityRain Window Selecting Rain WindowRainfall Memory Reset Setting Rain Display inches or mmSetting up Daily Rainfall Alert Enabling or Disabling Daily Rainfall AlertConfiguring Wind Display Setting Wind Speed in km/h, mph, m/s or knotsResetting the Wind Statistics Memory Viewing Wind StatisticsEnable/Disable Time Alarms Programming Time AlarmsDisabling the Wind Alert Disable/Enable Snooze function Disable alarmsAtomic Time Reception Memory Reset Procedure MaintenanceTroubleshooting CleaningAnemometer Rain GaugeAppendix City Codes Weather forecast is inaccuratePage Specifications Power 12 AA Batteries included Battery life alkalineWind Direction Wind SpeedWeight without batteries DimensionsDeclaration of Conformity

Related manuals

Manual 33 pages 39.1 Kb