Honeywell TE821WD Custom Weather Station Settings, Pressure and Weather Forecast Window

Page 15

∙Press SET to confirm selection.

∙Press UP or DOWN to select the correct minute.

∙Press SET to confirm selection and to complete the initial programming for your weather station. After programming is completed, the display will return to the default Clock and Alarm Window.

Note: If you do not complete this sequence your entries will be lost.

Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm Window and all previous settings will be cancelled.

Custom Weather Station Settings

The basic operation of your weather station has been designed to work right out of the box 10 minutes after power is provided to the main unit. To use your station, you will have to complete the steps identified under INITIAL SETUP while this section of the manual will provide you with additional operational details and suggestions for custom settings and alarms including:

∙The time alarms (Clock and Alarm Window)

∙The temperature alerts (Temperature and Humidity Window)

∙Daily rainfall alerts (Rain Window)

∙Wind alerts (Wind Window)

Pressure and Weather Forecast Window

Your weather station is designed to display (local) barometric pressure, sea level pressure, weather forecast and moon phases. Historical statistics can also be viewed, including the sea-level pressure for the past 24 hours, moon phase for the past and following 39 days, and a selectable bar-chart for viewing pressure/ temperature & humidity history. Pressure is displayed inHg (English), hPa/mBar (scientific) or mmHg (metric). Altitude is displayed in meters or feet.

Display:

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Honeywell Appendix City Codes Specifications Table of ContentsBefore you begin Standard Package ContentsInstallation IntroductionThermo-Hygrometer Sensor TS33C FeaturesMounting Placement tipsRain Gauge TS906 Anemometer wind sensor TS805 Wind Vane Time AssemblyMain Unit AligningWeather DisplayAvoid placing the main unit in the following areas Buttons and Controls Page Initial Set up Clock and Alarms Window Clock and Calendar DisplaysOperation and Window Selection Initial Settings City, Time, Date and Language Selecting Clock and Alarm WindowPressure and Weather Forecast Window Custom Weather Station SettingsSelect Pressure and Weather Forecast Window Pressure and Altitude InformationChanging Pressure and Altitude Paramet ers Changing or Setting Sea Level Pressure Changing or Setting AltitudeViewing the Sea Level Pressure History Viewing the Pressure, Temperature and Humidity Bar Charts Viewing the Moon Phase HistoryMoon Phas e Diagram Weather Forecast Displays Temperature and Humidity Display Temperature and Humidity WindowTemperature in Celsius or Fahrenheit Selecting Temperature and Humidity WindowViewing Temperature and Humidity for each Channel Temperature and Dew Point DisplaysSelecting Rain Window Disabling Temperature Alarm levelsViewing the Max/Min Channel Temperature and Humidity Rain WindowEnabling or Disabling Daily Rainfall Alert Rainfall Memory ResetSetting Rain Display inches or mm Setting up Daily Rainfall AlertViewing Wind Statistics Configuring Wind DisplaySetting Wind Speed in km/h, mph, m/s or knots Resetting the Wind Statistics MemoryEnable/Disable Time Alarms Programming Time AlarmsDisabling the Wind Alert Disable/Enable Snooze function Disable alarmsAtomic Time Reception Maintenance Memory Reset ProcedureRain Gauge TroubleshootingCleaning AnemometerWeather forecast is inaccurate Appendix City CodesPage Specifications Wind Speed Power 12 AA Batteries includedBattery life alkaline Wind DirectionDimensions Weight without batteriesDeclaration of Conformity
Related manuals
Manual 33 pages 39.1 Kb
Top Page Image Contents