Honeywell TE821WD user manual Disabling Temperature Alarm levels, Selecting Rain Window

Page 21

∙In the Temperature and Humidity Mode, press ALARM/CHART button once selecting the desired alarm limit – Upper or Lower

∙Press and hold ALARM/CHART button until the remote temperature and (Upper Alarm) or (Lower Alarm) icon starts flashing.

∙Adjust the temperature digits for the corresponding Temperature Alarm limit using the UP por DOWN qbuttons. Press and hold either button for fast digits advance.

∙Press the ALARM/CHART button to confirm selection and return to the Temperature Alarm selection screen.

Disabling Temperature Alarm levels

With the Temperature & Humidity icon flashing, press the UP or DOWN arrow button to disable the alarm(s) – OFF will be displayed if alarm is disabled

Note: The temperature alarms have a 0.5 ºC deviation to prevent false alarms due to small temperature fluctuations. Temperature has to fall below (or above) the programmed level(s) to activate the alert.

Viewing the Max/Min Channel Temperature and Humidity

With the Temperature & Humidity icon flashing, press the MEMORY button to recall a current temperature and humidity, minimum temperature and humidity or maximum temperature and humidity at the remote location. To clear the temperature and humidity’s memories, press and hold the MEMORY button.

Rain Window

The main unit records the total amount of the rainfall for the last hour, 24 hours, past day, past week and the past month. The rainfall can be displayed in mm or inches. There is a daily rainfall alert that can be programmed in the unit if the daily rainfall exceeds a pre-programmed limit.

Selecting Rain Window

Press the UP or DOWN arrow buttons on the main unit until the RAIN icon on the display starts flashing.

Display:

Viewing Rain Statistics

With the rain icon flashing Press either SET or MEMORY button to recall a rain statistics for the past hour, past 24 hours,

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Honeywell Appendix City Codes Specifications Table of ContentsInstallation Standard Package ContentsIntroduction Before you beginThermo-Hygrometer Sensor TS33C FeaturesMounting Placement tipsRain Gauge TS906 Anemometer wind sensor TS805 Wind Vane Main Unit AssemblyAligning TimeWeather DisplayAvoid placing the main unit in the following areas Buttons and Controls Page Initial Set up Clock and Alarms Window Clock and Calendar DisplaysOperation and Window Selection Initial Settings City, Time, Date and Language Selecting Clock and Alarm WindowPressure and Weather Forecast Window Custom Weather Station SettingsSelect Pressure and Weather Forecast Window Pressure and Altitude InformationChanging Pressure and Altitude Paramet ers Changing or Setting Sea Level Pressure Changing or Setting AltitudeViewing the Sea Level Pressure History Viewing the Pressure, Temperature and Humidity Bar Charts Viewing the Moon Phase HistoryMoon Phas e Diagram Weather Forecast Displays Temperature and Humidity Display Temperature and Humidity WindowViewing Temperature and Humidity for each Channel Selecting Temperature and Humidity WindowTemperature and Dew Point Displays Temperature in Celsius or FahrenheitViewing the Max/Min Channel Temperature and Humidity Disabling Temperature Alarm levelsRain Window Selecting Rain WindowSetting Rain Display inches or mm Rainfall Memory ResetSetting up Daily Rainfall Alert Enabling or Disabling Daily Rainfall AlertSetting Wind Speed in km/h, mph, m/s or knots Configuring Wind DisplayResetting the Wind Statistics Memory Viewing Wind StatisticsEnable/Disable Time Alarms Programming Time AlarmsDisabling the Wind Alert Disable/Enable Snooze function Disable alarmsAtomic Time Reception Maintenance Memory Reset ProcedureCleaning TroubleshootingAnemometer Rain GaugeWeather forecast is inaccurate Appendix City CodesPage Specifications Battery life alkaline Power 12 AA Batteries includedWind Direction Wind SpeedDimensions Weight without batteriesDeclaration of Conformity
Related manuals
Manual 33 pages 39.1 Kb
Top Page Image Contents