Honeywell TE821W Disabling the Wind Alert, Enable/Disable Time Alarms, Programming Time Alarms

Page 24

∙Press ALARM/CHART button to confirm your selection and return to the wind alert selection screen.

Disabling the Wind Alert

To disable wind alert when it is displayed after pressing ALARM/CHART button press UP or DOWN arrow button – OFF will be displayed instead of previously set alarm time.

LED Backlight Options

The main unit backlight can be turned on, off or automatic depending on light conditions. The sensitivity of the backlight sensor can be adjusted to high or low using the switch, located on the back panel.

Note: For continuous backlight control the AC/DC adaptor must be plugged in.

Time Alarm Settings

There are two time alarms available on the main unit: Weekday alarm (W), and Single alarm (S)

∙If Weekday alarm is activated, it will sound at the set time and the alarm icon will flash Monday through Friday.

∙If Single day alarm is activated, it will sound at the set time and the alarm icon will flash only for this specific day and will not activate on subsequent days.

Note: The snooze duration for listed alarms can also be programmed up to 15 minutes.

Enable/Disable Time Alarms

∙Press the ALARM/CHART button to display the Weekday Alarm or Single Day Alarm time. If these alarms are not set, the abbreviation OFF will be displayed.

∙To enable or disable any of these alarms, press UP or DOWN arrow button

∙Press ALARM/CHART button to confirm your setting

Note: Press SET button anytime during alarm programming mode to return to the default clock display.

Programming Time Alarms

With the Clock and Alarm icon flashing, press the ALARM/CHART button to select the desired alarm.

∙Press and hold ALARM/CHART button until the hour digit will flash

∙Set the alarm hour using UP or DOWN arrow button. Press and hold either button for quick digit advance.

∙Press ALARM/CHART to confirm selection.

∙Set the alarm minutes using UP or DOWN arrow button. Press and hold either button for quick digit advance.

∙Press ALARM/CHART button to confirm selection.

∙Set a Snooze interval (both alarms share same snooze time duration) using UP or DOWN arrow button. Press and hold either button for quick digit advance.

∙Press ALARM/CHART button to confirm your selection.

After programming is completed, the display will return to the alarm selection screen.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Honeywell Table of Contents Appendix City Codes SpecificationsStandard Package Contents InstallationIntroduction Before you beginFeatures Thermo-Hygrometer Sensor TS33CPlacement tips MountingRain Gauge TS906 Anemometer wind sensor TS805 Wind Vane Assembly Main UnitAligning TimeWeather DisplayAvoid placing the main unit in the following areas Buttons and Controls Page Initial Set up Clock and Alarms Window Clock and Calendar DisplaysOperation and Window Selection Selecting Clock and Alarm Window Initial Settings City, Time, Date and LanguageCustom Weather Station Settings Pressure and Weather Forecast WindowSelect Pressure and Weather Forecast Window Pressure and Altitude InformationChanging Pressure and Altitude Paramet ers Changing or Setting Sea Level Pressure Changing or Setting AltitudeViewing the Sea Level Pressure History Viewing the Pressure, Temperature and Humidity Bar Charts Viewing the Moon Phase HistoryMoon Phas e Diagram Weather Forecast Displays Temperature and Humidity Window Temperature and Humidity DisplaySelecting Temperature and Humidity Window Viewing Temperature and Humidity for each ChannelTemperature and Dew Point Displays Temperature in Celsius or Fahrenheit Disabling Temperature Alarm levels Viewing the Max/Min Channel Temperature and Humidity Rain Window Selecting Rain WindowRainfall Memory Reset Setting Rain Display inches or mmSetting up Daily Rainfall Alert Enabling or Disabling Daily Rainfall AlertConfiguring Wind Display Setting Wind Speed in km/h, mph, m/s or knotsResetting the Wind Statistics Memory Viewing Wind StatisticsEnable/Disable Time Alarms Programming Time AlarmsDisabling the Wind Alert Disable/Enable Snooze function Disable alarmsAtomic Time Reception Memory Reset Procedure MaintenanceTroubleshooting CleaningAnemometer Rain GaugeAppendix City Codes Weather forecast is inaccuratePage Specifications Power 12 AA Batteries included Battery life alkalineWind Direction Wind SpeedWeight without batteries DimensionsDeclaration of Conformity
Related manuals
Manual 33 pages 39.1 Kb
Top Page Image Contents