Ericsson LPE-200 manual Operational Software Fatal System Errors

AE/LZB 119 1902 R1A

FATAL_LCD_NOACK	HARDWARE	40	LCD did not ack message.
FATAL_LCD_HARD_FAIL	HARDWARE	41	LCD hardware is invalid.
FATAL_SCI_NOHEAP	HARDWARE	50	Serial communication interface out of heap (RAM
			memory) space.
FATAL_DSP_NOACK	HARDWARE	60	DSP did not ack message.
FATAL_DSP_FIFOOVR	HARDWARE	61	DSP RX FIFO overflow.
FATAL_DSP_BADMSG	HARDWARE	62	Unknown message received from DSP.
FATAL_DSP_WRONGRESP	HARDWARE	63	Unexpected response received from DSP.
FATAL_DSP_TWOACKS	HARDWARE	64	Back-to-back ACKS received from DSP.
FATAL_DSP_NORESOURCE	HARDWARE	65	DSP queue is full.
FATAL_BL_NOHEAP	HARDWARE	91	Software memory error - Boot loader.
FATAL_BL_SCI_ATTACH	HARDWARE	92	Boot loader could not attach to SCI.
FATAL_RXSIF	HARDWARE	98	Phase samples are not changing.

Operational Software Fatal System Errors

Software fatal errors will automatically reset the radio. When the radio reset does not correct the problem, the radio must be serviced. Some of the errors listed below contain additional information to help resolve the problem.

Error Name	Message	Code	Description
RADC_PITD_ERROR	TRACKING	200	Personality tracking data error. Reprogram the
			tracking data.
RADC_PIHW_ERROR	PERSDATA	201	Personality hardware data error. Reprogram
			the personality.
RADC_FREQ_ERROR	FREQDATA	202	Personality frequency data error. Reprogram
			the personality.
RADC_PITD_MALLOC_ERROR	SOFTWARE	203	Personality tracking data malloc error.
			Reprogram the tracking data.
RADC_PITD_CKSUM_ERROR	SOFTWARE	204	Personality tracking data checksum error.
			Reprogram the tracking data.
DACS_MODEM_FATAL_ERROR	SOFTWARE	301	Unable to correctly configure the modem for
			EDACS operation. Reprogram the
			personality.
DACS_RADC_FAILURE	SOFTWARE	302	Power cycle the radio.
DACS_TU_PUT_CISYSMSG_ERROR	SOFTWARE	303	CI message buffer is not enabled.
CONV_RADC_ERROR	SOFTWARE	400	Error calling RADC function. Power cycle the
			radio.
CONV_PUT_UIMSG_ERROR	SOFTWARE	402	UI message buffer not enabled. Power cycle
			the radio.
CONV_MODEM_RXOVR	SOFTWARE	403	Conventional DIGV modem overflow.
CONV_MODEM_RXAVR	SOFTWARE	404	Conventional DIGV modem underflow.
CONV_MODEM_FATAL_ERROR	SOFTWARE	405	Unable to correctly configure the modem for
			conventional DIGV operation
CONV_PERS_ERROR	PERSDATA	407	Conventional personality error.
PI_NOPERS_ERROR	PERSDATA	500	Personality data is not present. Program the
			personality.
PI_CRC_ERROR	PERSDATA	501	Flash personality CRC did not match
			EEPROM. Reprogram the personality.
PI_DESC_CRC_ERROR	PERSDATA	502	Crucial personality data has incorrect CRC.
			Reprogram the personality.

24