AE/LZB 119 1902 R1A
Non-Fatal Errors
| |
Error message | Description |
UNKNOWN | Undocumented error. |
FEAT ERR | Feature encryption error. |
DSP ERR | DSP error. |
NO KBANK | Attempt to keyload w/o bank storage. |
NO PVT | Attempt to keyload w/o private DSP file loaded. |
Special Error Codes
When the synthesizer becomes unlocked on any frequency (RX or TX), the radio will display a message and sound an alert tone. The message will be displayed for approximately 2 seconds and the alert tone will continuously beep on and off. During this time, the radio is trying to reload the synthesizer to get a lock condition. If the lock condition is achieved, the unlock indications will cease. If the lock condition can not be achieved, the user will not be able to RX or TX on that frequency. The message displayed on the radio is shown below:
ERROR CODES - SPECIFIC
Hardware Fatal System Errors
Hardware fatal errors will automatically reset the radio. When the radio reset does not correct the problem, the radio must be serviced.
Error Name | Message | Code | Description |
FATAL_SYS_TRAP | HARDWARE | 0 | Fatal system error trap number. |
FATAL_NMI_ERROR | HARDWARE | 1 | NMI occurred outside of sleep. |
FATAL_RAM_ERROR | HARDWARE | 2 | 8k RAM test error. |
FATAL_FLSH_CHKSUM | HARDWARE | 4 | Flash checksum test error. |
FATAL_TG_LOAD | HARDWARE | 10 | TG driver failed initialization. |
FATAL_DSP_LOAD | HARDWARE | 11 | DSP driver failed initialization. |
FATAL_ABBIE_LOAD | HARDWARE | 12 | ABBIE driver failed initialization. |
FATAL_EE_LOAD | HARDWARE | 13 | EEPROM driver failed initialization. |
FATAL_INTOUT_LOAD | HARDWARE | 15 | Standard input/output driver failed initialization. |
FATAL_INTIN_LOAD | HARDWARE | 16 | Standard input driver failed initialization. |
FATAL_RADIO_LOAD | HARDWARE | 17 | RADIO driver failed initialization. |
FATAL_MODEM_LOAD | HARDWARE | 18 | MODEM driver failed initialization. |
FATAL_EXTIO_LOAD | HARDWARE | 19 | External I/O driver failed initialization. |
FATAL_SCI_LOAD | HARDWARE | 20 | Serial communication interface driver failed |
|
|
| initialization. |
FATAL_I2C_NOSI | HARDWARE | 22 | I2C failed to return SI status. |
23