RADIO MODE | TRAFFIC INFORMATION |
Setting the radiotext display
Some stations use the RDS signal to broadcast scrolling texts known as ra- diotexts. You can activate or deactivate the radiotext display.
➮Press the TUNER button < in ra- dio mode.
The radio functions menu appears in the display.
➮Press the NEXT button 3.
The “second page”of the radio functions menu is displayed.
➮Press the softkey 4 assigned to the “RTXT”display item.
“RTXT ON” or “RTXT OFF” appears briefly in the display.
➮Press the TUNER button < or the joystick OK 7.
The settings are saved.
Traffic information
Your unit is equipped with an
Every time a traffic announcement (TA) is transmitted, you will automatically be switched from a station that does not provide traffic information to a station within the broadcasting network that does.
Once the traffic announcement has been heard, you will be switched back to the programme that you were listen- ing to before.
Switching traffic information priority on/off
➮Press the TUNER button < in ra- dio mode.
The radio functions menu appears in the display.
➮Press the softkey 4 assigned to the “TRAF”display item.
Traffic announcement priority is active when a traffic jam symbol is displayed.
Note:
The TA menu is displayed during a traf- fic announcement.
To interrupt the current traffic announce- ment,
➮press the softkey 4 assigned to the “OFF”display item.
If you want to deactivate priority for traf- fic announcements,
➮press the softkey 4 assigned to the “TRAF”display item.
48