UV7
PREPARATION
Congratulations on your purchase of the Phase Linear UV7 Mobile Multimedia Receiver.
It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Phase Linear UV7 installed by a reputable installation shop.
Features
DVD
•Compatible formats:
•Region 1 playback
•16:9 Aspect ratio - Normal / Cinema
•Front panel DVD control
•
•Play, Pause, Stop, Slow
•Chapter Up / Down
•Wolfson Microelectronics high performance
•16Mbit
MP3/WMA
•GIGA MP3 - Store up to 999 MP3 files on a DVD
•
•Direct track access
•Play, Pause, Stop, Track Up / Down
•100 second (MP3), 200 second (WMA) ESP - Electronic Skip Protection
CD
•
•4 second ESP - Electronic Skip Protection
AM/FM Tuner
•US/Euro/Latin/Asia Tuner
•30 Station presets (18FM/12AM)
•JENSEN Plus Tuner II
Outboard Media Module
•XM Radio and iPod
XM Ready
•Requires Optional Terk XMD1000 Tuner Box
•Requires Optional Terk XMDJEN100 or Jensen JXMC XM Cables
•Advanced display shows the artist, song title, and XM channel and category at a glance
•Direct Channel entry
Made for iPod
•Controls and charges all iPod's except "Shuffle"
•Displays all text information including category, track name, artist and channel number
Chassis
•
•Full automatic motorized TFT LCD
•
•Beep Tone confirmation
•Heat management system - Incorporates forced air- cooling to keep the
•Heavy duty galvanized chassis
General
•Full function infrared remote control
•1 NTSC composite video output for additional screens
•OSD- On Screen Display menu control
•High performance audio processor
•Electronic volume, bass, treble, balance and fader
•Bass center frequency adjustment - 60, 80, 100, 130, 150 and 200Hz
•Bass Q factor - 1.0, 1.25, 1.5 and 2.0
•Treble center frequency adjustment - 10, 12.5, 15 and 17kHz
•Subwoofer crossover - 80, 120 and 160Hz
•Subwoofer Phase - 0, 180 degrees
•Subwoofer level - variable
•
•5V Peak / 2V RMS RCA outputs - all channels
•
•
•Single Subwoofer RCA output
•
•Flex fader
•Front panel (when screen is closed) high contrast LCD
•Rotary encoder audio control
•Joystick menu navigation
Tools and Supplies
You will need these tools and supplies to install your UV7:
•Torx type,
•Wire cutters and strippers
•Tools to remove existing radio (screwdriver, socket wrench set or other tools)
•Electrical tape
•Crimping tool
•Volt meter/test light
•Crimp connections
•18 gauge wire for power connections
•16 – 18 gauge speaker wire
WARNING! Only connect the unit to
WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions.
WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law.
WARNING! Never disassemble or adjust the unit.
WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water.
WARNING! Never use irregular discs.
WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.
WARNING! Using an improper fuse may cause damage to the unit and result in a fire.
WARNING! To prevent damage to the screen, avoid touching it with your fingers or other objects.
WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually.
Optional Accessories
iAUX3 READY (Sold Separately)
•Can connect to any portable media device or multimedia device using a standard 3.5mm plug.
•Converts 3.5mm auxiliary input to RCA stereo outputs for easy connection to the radio’s auxiliary inputs.
1