•aq_bridge_username: The username to connect to the Spoke DB.
•encrypted_aq_bridge_password: The encrypted password of the aq_bridge_username. To encrypt a password, use the OAI_HOME/oai/9.0.4/bin/encrypt utility from the console. This utility generates cipher text and prints it on the console, which can be copied to the adapter.ini file.
•aq_bridge_owner: The name of the schema to which the AQs in the spoke database belongs. This value should be set to a valid schema name before the adapter is started.
4.Optionally, you can configure the following parameters to improve the performance of the adapter:
•agent_pipeline_to_hub = false
•agent_pipeline_from_hub = false
•agent_log_level = 0
5.Copy the DTDs from APPL_TOP at the following location: $XNB_TOP/xml/oag72, and place them in the home folder of the adapter on the host file system, i.e. <OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>. The AQ Adapter requires the DTDs of the XML messages that it reads and writes into the AQs.
6.To start an adapter service, run the following script from the console:
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>/start
7.To stop an adapter service, run the following script from the console:
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>/stop
Note: The following file contains the log of adapter activities:
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>/logs/<latest_ti mestamp>/oailog.txt
Dropping the Hub Schema
To drop the hub schema, you must stop the adapters and the repository service. The steps are:
1.Run the following script from the console to stop the adapters:
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>/stop