American Megatrends MAN-3200-SG setup guide Step Four Allocating Space

Page 16

Step Four: Allocating Space

Enter the size of your desired Volume. The default volumes cannot exceed the available physical space due to the fact that they are both using Exact Provisioning by default. Click Next.

Note: You can use the slider bar to adjust the size of each Volume type. If you have selected Only NAS or Only SAN, then you will only be able to adjust the slider for that type of Volume.

16	StorTrends® 3200 Set Up Guide (StorTrends iTX version 2.7)

Image 16

Contents Thank You Unpack the StorTrends 3200 Storage AppliancePreparing for Setup Choosing a Setup LocationGeneral Safety Precautions General Safety PrecautionsRack Mounting Considerations Installing the System into a RackInner Rack Rails Installing the Inner Rack Rails To install the rack railsInstalling the Chassis into the Server Rack Outer Rack Rails To install the Outer Rack RailsSteps Description Completing the Hardware Installation Step DescriptionStep Description Step One Power your system on Step Two Get the IP addressPassword Step Four Logging on to the StorTrends Storage ApplianceUsing the Quick and Easy Setup Wizard Step One Quick and Easy Wizard Step Two RAID Level Step Three SAN or NAS or Both Step Four Allocating Space Step Five Summary View StorTrends 3200 Set Up Guide StorTrends iTX version Step Six All Done No Errors Using the Advanced Setup Wizard Step One Advanced WizardStep Two Create a New Storage Pool Step Three Select Pool Select the DisksSet the RAID Levels Type in your Storage Pool’s name Type in a Storage Pool NameStorTrends 3200 Set Up Guide StorTrends iTX version 2.7 Step Four Configure SAN Volume Enter Volume Size Enter Volume NameSelect Thin or Exact Provisioning Select SAN as the Dialect Type Create Target and Target NameStep Five Configure NAS Volume Enter Volume Name Select NAS as the Dialect Type Create Share and Share NameStep Six Summary View and Status Step Seven All Done No Errors