American Megatrends MAN-3200-SG Installing the Chassis into the Server Rack Outer Rack Rails

Page 6

Installing the Chassis into the Server Rack

Outer Rack Rails

Outer rails attach to the server rack and hold the server in place. The outer rails for the StorTrends 3200 chassis extend between 30 inches and 33 inches.

To install the Outer Rack Rails

Steps	Description
1	Begin by measuring the distance from the front rail to the rear rail of
	the rack.
2	Attach a short bracket to the front side of the right outer rail and a
	long bracket to the rear side of the right outer rail.
3	Adjust both the short and long brackets to the proper distance so that
	the rail can fit snugly into the rack.
4	Secure the short bracket to the front side of the outer rail with two
	M4 screws and the long bracket to the rear side of the outer rail with
	three M4 screws.
5	Repeat these steps for the left outer rail.

6	StorTrends® 3200 Set Up Guide (StorTrends iTX version 2.7)

Image 6

Contents Thank You Unpack the StorTrends 3200 Storage AppliancePreparing for Setup Choosing a Setup Location General Safety Precautions General Safety PrecautionsInstalling the System into a Rack Rack Mounting ConsiderationsInner Rack Rails Installing the Inner Rack Rails To install the rack railsInstalling the Chassis into the Server Rack Outer Rack Rails To install the Outer Rack RailsSteps Description Completing the Hardware Installation Step DescriptionStep Description Step One Power your system on Step Two Get the IP addressPassword Step Four Logging on to the StorTrends Storage ApplianceUsing the Quick and Easy Setup Wizard Step One Quick and Easy Wizard Step Two RAID Level Step Three SAN or NAS or Both Step Four Allocating Space Step Five Summary View StorTrends 3200 Set Up Guide StorTrends iTX version Step Six All Done No Errors Using the Advanced Setup Wizard Step One Advanced WizardStep Two Create a New Storage Pool Step Three Select Pool Select the DisksSet the RAID Levels Type in your Storage Pool’s name Type in a Storage Pool NameStorTrends 3200 Set Up Guide StorTrends iTX version 2.7 Step Four Configure SAN Volume Enter Volume Name Enter Volume SizeSelect Thin or Exact Provisioning Select SAN as the Dialect Type Create Target and Target NameStep Five Configure NAS Volume Enter Volume Name Select NAS as the Dialect Type Create Share and Share NameStep Six Summary View and Status Step Seven All Done No Errors