American Megatrends MAN-3200-SG setup guide Step Four Configure SAN Volume

Page 26

Step Four: Configure SAN Volume

STOP!

This section allows you to configure a SAN Volume and a SAN Target on to the Storage Appliance. If you have configured this storage appliance as a NAS Only unit, SKIP THIS STEP and go to Step Five: Configure NAS Volume.

The next page allows you to Create SAN Volume and Target.

26

StorTrends® 3200 Set Up Guide (StorTrends iTX version 2.7)

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Thank You Unpack the StorTrends 3200 Storage AppliancePreparing for Setup Choosing a Setup LocationGeneral Safety Precautions General Safety PrecautionsInner Rack Rails Installing the System into a RackRack Mounting Considerations Installing the Inner Rack Rails To install the rack railsInstalling the Chassis into the Server Rack Outer Rack Rails To install the Outer Rack RailsSteps Description Completing the Hardware Installation Step DescriptionStep Description Step One Power your system on Step Two Get the IP addressPassword Step Four Logging on to the StorTrends Storage ApplianceUsing the Quick and Easy Setup Wizard Step One Quick and Easy Wizard Step Two RAID Level Step Three SAN or NAS or Both Step Four Allocating Space Step Five Summary View StorTrends 3200 Set Up Guide StorTrends iTX version Step Six All Done No Errors Using the Advanced Setup Wizard Step One Advanced WizardStep Two Create a New Storage Pool Step Three Select Pool Select the Disks Set the RAID Levels Type in your Storage Pool’s name Type in a Storage Pool NameStorTrends 3200 Set Up Guide StorTrends iTX version 2.7 Step Four Configure SAN Volume Select Thin or Exact Provisioning Enter Volume NameEnter Volume Size Select SAN as the Dialect Type Create Target and Target NameStep Five Configure NAS Volume Enter Volume Name Select NAS as the Dialect Type Create Share and Share NameStep Six Summary View and Status Step Seven All Done No Errors
Top Page Image Contents